繁體
Start main content

Publications

Publications of recent five years

2021

2020

2019

2018

2017
 
-2021-
  1. Wang, RX; Cheung, CF. (2022, early access in 2021) “CenterNet-based defect detection for additive manufacturing”, EXPERT SYSTEMS WITH APPLICATIONS, 188, 116000.
  2. Zhou, HT; Yip, WS; Ren, JZ; To, S. (2022, early access in 2021) “Thematic analysis of sustainable ultra-precision machining by using text mining and unsupervised learning method”, JOURNAL OF MANUFACTURING SYSTEMS, 62, p.218-p.233.
  3. Zhu, ZH; Chen, L; Niu, YH; Pu, XN; Huang, P; To, S; Zhu, LM; Zhu, ZW. (2022, early access in 2021) “Triaxial Fast Tool Servo Using Hybrid Electromagnetic–Piezoelectric Actuation for Diamond Turning”, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 69(2), p.1728-p.1738.
  4. Li, DH; Cao, HR; Chen, XF. (2022, early access in 2021) “Active control of milling chatter considering the coupling effect of spindle-tool and workpiece systems”, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 169, 108769.
  5. Zhao, ZJ; Yin, TF; To, S; Zhu, ZW; Zhuang, ZX. (2022, early access in 2021) “Material removal energy in ultraprecision machining of micro-lens arrays on single crystal silicon by slow tool servo”, JOURNAL OF CLEANER PRODUCTION, 335, 130295.
  6. Wang, SJ; Tao, Z; Deng, WP; Sun, ZW; To, S. (2022, early access in 2021) “Analytical modeling and prediction of cutting forces in orthogonal turning: a review”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 119(3-4), p.1407-p.1434.
  7. Sun, ZW; To, S; Li, PZ; Wang, SJ; Zhang, T. (2022, early access in 2021) “Analytical modelling of cutting forces in ultra-precision fly grooving considering effects of trans-scale chip thickness variation and material microstructure”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 118(9-10), p.3209-p.3227.
  8. Sun, WT; Wu, B; Fu, H; Yang, XS; Qiao, XG; Zheng, MY; He, Y; Lu, J; Shi, SQ. (2022, early access in 2021) “Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy”, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 99, p.223-p.238.
  9. Yip, WS; To, S; Zhou, HT. (2022, early access in 2021) “Current status, challenges and opportunities of sustainable ultra-precision manufacturing”, JOURNAL OF INTELLIGENT MANUFACTURING, 1-13.
  10. Liu, C; Zheng, P; Xu, X. (2022, early access in 2021) “Digitalisation and servitisation of machine tools in the era of Industry 4.0: a review”, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1-33.
  11. Wang, CJ; Zhang, ZL; Cheung, CF; Luo, W; Loh, YM; Lu, YJ; Kong, LB; Wang, SX. (2022, early access in 2021) “Maskless fluid jet polishing of optical structured surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 73, p.270-p.283.
  12. Liu, C; Su, ZW; Xu, X; Lu, YQ. (2022, early access in 2021) “Service-oriented industrial internet of things gateway for cloud manufacturing”, ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 73, 102217.
  13. Khalil, AK; Yip, WS; To, S. (2022, early access in 2021) “Theoretical and experimental investigations of magnetic field assisted ultra-precision machining of titanium alloys”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 300, 117429.
  14. Zhou, X; Fu, H; Zhu, JH, Yang, XS. (2022, early access in 2021) “Atomistic simulations of the surface severe plastic deformation-induced grain refinement in polycrystalline magnesium: The effect of processing parameters”, JOURNAL OF MAGNESIUM AND ALLOYS, 10(5), p.1242-p,1255.
  15. Zhao, CY; Cheung, CF; Fu, WP. (2021) “An Investigation of the Cutting Strategy for the Machining of Polar Microstructures Used in Ultra-Precision Machining Optical Precision Measurement”, MICROMACHINES, 12(7), 755.
  16. Yip, WS; To, S. (2021) “A critical analysis of sustainable micro-manufacturing from the perspective of the triple bottom line: A social network analysis”, ENVIRONMENTAL IMPACT ASSESSMENT REVIEW, 90, 106628.
  17. Zhu, ZW; Chen, L; To, S. (2021) “A novel direct drive electromagnetic XY nanopositioning stage”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 70(1), p.415-p.418.
  18. Zhu, JM; Zhang, G; Huang, H; Wang, D; Chen, PJ; Yang, XS. (2021) “A novel two-stage martensitic transformation induced by nanoscale concentration modulation in a TiNb-based shape memory alloy”, COMPUTATIONAL MATERIALS SCIENCE, 200, 110843.
  19. Chen, CH; Shi, FY; Xu, ZL. (2021) “Advanced electrode materials for nonaqueous calcium rechargeable batteries”, JOURNAL OF MATERIALS CHEMISTRY A, 9(20), p.11908-p.11930.
  20. Zhang, CB; Cheung, CA; Bulla, B; Zhao, CY. (2021) “An Investigation of the High-Frequency Ultrasonic Vibration-Assisted Cutting of Steel Optical Moulds”, MICROMACHINES, 12(4), 460.
  21. Sun, ZW; Zhang, T; Li, PZ; Wang, SJ; To, S; Wang, HL. (2021) “Analytical modelling of the trans-scale cutting forces in diamond cutting of polycrystalline metals considering material microstructure and size effect”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 204, 106575.
  22. Fu, H; Zhou, XY; Wu, B; Qian, L; Yang, XS. (2021) “Atomic-scale dissecting the formation mechanism of gradient nanostructured layer on Mg alloy processed by a novel high-speed machining technique”, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 82, p.227-p.238.
  23. Zhang, SJ; Peng, W; Xiong, ZW; To, S. (2021) “Case study for sampling effect in nanometric surface roughness of ultra-precision grinding”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 235(2), p.650-p.656.
  24. Yuan, W; Cheung, CF. (2021) “Characterization of Surface Topography Variation in the Ultra-Precision Tool Servo-Based Diamond Cutting of 3D Microstructured Surfaces”, MICROMACHINES, 12(12), 1448.
  25. Chen, SS; Yang, SM; Liao, ZR; Cheung, CF; Jiang, ZD; Zhang, FH. (2021) “Curvature effect on surface topography and uniform scallop height control in normal grinding of optical curved surface considering wheel vibration”, OPTICS EXPRESS, 29(6), p.8041-p.8063.
  26. Xie, YL; Li, YM; Cheung, CF; Zhu, ZW; Chen, XG. (2021) “Design and analysis of a novel compact XYZ parallel precision positioning stage”, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 27(5), p.1925-p.1932.
  27. Xu, P; Cheung, CF; Li, B; Wang, CJ; Zhao, CY. (2021) “Design, Dynamic Analysis, and Experimental Evaluation of a Hybrid Parallel-Serial Polishing Machine With Decoupled Motions”, JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 13(6), 61008.
  28. Wang, CJ; Cheung, CF; Ho, LT; Loh, YM. (2021) “Development of a fluid line-jet polishing process for rotational axisymmetric surfaces”, JOURNAL OF MANUFACTURING PROCESSES, 61, p.15-p.24.
  29. Du, HH; Yip, W; Zhu, ZW; To, S. (2021) “Development of a two-degree-of-freedom vibration generator for fabricating optical microstructure arrays”, OPTICS EXPRESS, 29(16), p.25903-p.25921.
  30. Chau, SY; To, S; Wang, H; Yip, WS; Chan, KC; Cheung, CF. (2021) “Effect of cutting speed on surface integrity and chip formation in micro-cutting of Zr-based bulk metallic glass”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 114(11-12), p.3301-p.3310.
  31. Zhao, ZJ; To, S; Zhuang, ZX; Yin, TF. (2021) “Effects of microstructures on the material removal energy in ultraprecision machining of Ti6Al4V alloys”, MATERIALS LETTERS, 300, 130231.
  32. Liu, MJ; Du, HH; Cheng, YQ; Zheng, HX; Jin, YK; To, S; Wang, S; Wang, ZAK. (2021) “Explosive Pancake Bouncing on Hot Superhydrophilic Surfaces”, ACS APPLIED MATERIALS & INTERFACES, 13(20), p.24321-p.24328.
  33. Du, HH; Yin, TF; Yip, WS; Zhu, ZW; To, S. (2021) “Generation of structural colors on pure magnesium surface using the vibration-assisted diamond cutting”, MATERIALS LETTERS, 299, 130041.
  34. Yuan, SQ; Gan, B; Qian, L; Wu, B; Fu, H; Wu, HH; Cheung, CF; Yang, XS. (2021) “Gradient nanotwinned CrCoNi medium-entropy alloy with strength-ductility synergy”, SCRIPTA MATERIALIA, 203, 114117.
  35. Yang, XS; Yuan, SQ; Fu, H; Wang, YJ. (2021) “Grain boundary-mediated plasticity accommodating the cracking process in nanograined gold: In situ observations and simulations”, SCRIPTA MATERIALIA, 194, 113693.
  36. Yip, WS; To, S; Sun, ZW. (2021) “Hybrid ultrasonic vibration and magnetic field assisted diamond cutting of titanium alloys”, JOURNAL OF MANUFACTURING PROCESSES, 62, p.743-p.752.
  37. Zhao, Z; Jelenković, EV; Xiao, G; Zhuang, Z; To S. (2021) “Hydrogen Ion Implantation Induced Cutting Behavior Variation in Plunge Cutting of the Monocrystalline Silicon”, Nanomanufacturing and Metrology, 4(4), p.209-p.215.
  38. Yip, WS; To, S. (2021) “Identification of stakeholder related barriers in sustainable manufacturing using Social Network Analysis”, SUSTAINABLE PRODUCTION AND CONSUMPTION, 27, p.1903-p.1917.
  39. Zhuang, QN; Ma, ZJ; Gao, Y; Zhang, YK; Wang, SC; Lu, X; Hu, H; Cheung, CF; Huang, QY; Zheng, ZJ. (2021) “Liquid-Metal-Superlyophilic and Conductivity-Strain-Enhancing Scaffold for Permeable Superelastic Conductors”, ADVANCED FUNCTIONAL MATERIALS, 31(47), 2105587.
  40. Yin, TF; Zhang, GQ; Du, JJ; To, S. (2021) “Nonlinear Analysis of Stability and Rotational Accuracy of an Unbalanced Rotor Supported by Aerostatic Journal Bearings”, IEEE ACCESS, 9, p.61887-p.61900.
  41. Chen, MK; Wu, YF; Feng, L; Fan, QB; Lu, MH; Xu, T; Tsai, DP. (2021) “Principles, Functions, and Applications of Optical Meta-Lens”, ADVANCED OPTICAL MATERIALS, 9(4), 2001414.
  42. Wu, B; Fu, H; Zhou, XY; Qian, L; Luo, JS; Zhu, JM; Lee, WB; Yang, XS. (2021) “Severe plastic deformation-produced gradient nanostructured copper with a strengthening-softening transition”, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 819, 141495.
  43. Guo, S; Ren, GH; Zhang, B. (2021) “Subsurface Defect Evaluation of Selective-Laser-Melted Inconel 738LC Alloy Using Eddy Current Testing for Additive/Subtractive Hybrid Manufacturing”, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 34(1), 111.
  44. Zhou, J; Zhu, CY; Li, LH; Ng, MC; Liu, K. (2021) “Temperature and rate dependent debonding behaviors of precision glass molding interface”, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 104(1), p.243-p.255.
  45. Yuan, Z; Wang, BH; Liu, C; Wang, Z; Zhang, XC; Zhang, Y. (2021) “The Crack Propagation Trend Analysis in Ceramic Rolling Element Bearing considering Initial Crack Angle and Contact Load Effect”, SHOCK AND VIBRATION, 2021, 5559296.
  46. Zhu, YD; Zhang, QL; Zhao, QL; To, SE. (2021) “The material removal and the nanometric surface characteristics formation mechanism of TiC/Ni cermet in ultra-precision grinding”, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 96, 105494.
  47. Yuan, W; Cheung, CF. (2021) “Theoretical and experimental investigation of the tool indentation effect in ultra-precision tool-servo-based diamond cutting of optical microstructured surfaces”, OPTICS EXPRESS, 29(24), p.39284-p.39303.
  48. Wang, TY; Huang, L; Vescovi, M; Kuhne, D; Zhu, Y; Negi, VS; Zhang, ZL; Wang, CJ; Ke, XL; Choi, H; Pullen, WC; Kim, D; Kemao, Q; Nakhoda, K; Bouet, N; Idir, M. (2021) “Universal dwell time optimization for deterministic optics fabrication”, OPTICS EXPRESS, 29(23), p.38737-p.38757.

 

-2020-
  1. Wang, CJ; Cheung, CF; Ho, LT; Yung, KL; Kong, LB. (2020) “A novel magnetic field-assisted mass polishing of freeform surfaces”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 279, 116552.
  2. Zhao, ZJ; To, S; Zhu, ZW; Yin, TF. (2020) “A theoretical and experimental investigation of cutting forces and spring back behaviour of Ti6Al4V alloy in ultraprecision machining of microgrooves”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 169, 105315.
  3. Jiang, N; Wang, YL; Chan, KC; Chan, CY; Sun, HZ; Li, GJ. (2020) “Additive Manufactured Graphene Coating with Synergistic Photothermal and Superhydrophobic Effects for Bactericidal Applications”, GLOBAL CHALLENGES, 4(1), 1900054.
  4. Zhou, HT; Yip, WS; Ren, JZ; To, S. (2020) “An Interaction Investigation of the Contributing Factors of the Bullwhip Effect Using a Bi-Level Social Network Analysis Approach”, IEEE ACCESS, 8, p.208737-p.208752.
  5. Wang, CJ; Cheun,g CF; Ho, LT; Loh, YM. (2020) “An Investigation of Effect of Stand-Off Distance on the Material Removal Characteristics and Surface Generation in Fluid Jet Polishing”, Nanomanufacturing and Metrology, 3(2), p.112-p.122.
  6. Liu, MY; Cheung, CF; Feng, X; Wang, CJ; Cao, ZC. (2020) “Any-degrees-of-freedom (anyDOF) registration for the characterization of freeform surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 62, p.170-p.180.
  7. Li, LH; Yang, G; Lee, WB; Ng, MC; Chan, KL. (2020) “Carbide-bonded graphene-based Joule heating for embossing fine microstructures on optical glass”, APPLIED SURFACE SCIENCE, 500, 144004.
  8. Cheng, CT; To, S; Zhang, GQ. (2020) “Characterization of intermediate wetting states on micro-grooves by water droplet contact line”, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 91, p.69-p.78.
  9. Wang, HL; Zhang, T; Wang, SJ; To, S. (2020) “Characterization of the Friction Coefficient of Aluminum Alloy 6061 in Ultra-Precision Machining”, METALS, 10(3), 336.
  10. Zhang, SJ; Guo, P; Xiong, ZW; To, S. (2020) “Cyclic shear angle for lamellar chip formation in ultra-precision machining”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 234(13), p.2673-p.2680.
  11. Zhu, ZW; Chen, L; Huang, P; Schonemann, L; Riemer, O; Yao, JY; To, S; Zhu, WL. (2020) “Design and Control of a Piezoelectrically Actuated Fast Tool Servo for Diamond Turning of Microstructured Surfaces”, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 67(8), p.6688-p.6697.
  12. Huang, P; Wu, XY; To, S; Zhu, LM; Zhu, ZW. (2020) “Deterioration of form accuracy induced by servo dynamics errors and real-time compensation for slow tool servo diamond turning of complex-shaped optics”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 154, 103556.
  13. Sun, ZW; To, S; Wang, SJ; Du, JJ. (2020) “Development of self-tuned diamond milling system for fabricating infrared micro-optics arrays with enhanced surface uniformity and machining efficiency”, OPTICS EXPRESS, 28(2), p.2221-p.2237.
  14. Lin J., Zhu Z., Cheung C.F., Yan F., Li G. (2020) “Digital manufacturing of functional materials for wearable electronics”, Journal of Materials Chemistry C, 8(31), p.10587-p.10603.
  15. Li, GJ. (2020) “Direct laser writing of graphene electrodes”, JOURNAL OF APPLIED PHYSICS, 127(1), 10901.
  16. Huang, P; Li, HC; Zhu, WL; Wang, HT; Zhang, GQ; Wu, XY; To, SE; Zhu, ZW. (2020) “Effects of eco-friendly cooling strategy on machining performance in micro-scale diamond turning of Ti-6Al-4V”, JOURNAL OF CLEANER PRODUCTION, 243, 118526.
  17. Yip, WS; To, S. (2020) “Energy consumption modeling of ultra-precision machining and the experimental validation”, ENERGY, 196, 117018.
  18. Li, LH; Wong, HC; Lee, RB. (2020) “Evaluation of a Novel Nanodroplet Cutting Fluid for Diamond Turning of Optical Polymers”, POLYMERS, 12(10), 2213.
  19. Lu, YJ; Luo, W; Wu, XY; Xu, B; Wang, CJ; Li, JJ; Li, LJ. (2020) “Fabrication of Micro-Structured LED Diffusion Plate Using Efficient Micro Injection Molding and Micro-Ground Mold Core”, POLYMERS, 12(6), 1307.
  20. Tong, Z; Zhong, WB; To, S; Zeng, WH. (2020) “Fast-tool-servo micro-grooving freeform surfaces with embedded metrology”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 69(1), p.505-p.508.
  21. Wang, SX; Cheung, CF; Kong, LB; Ren, MJ. (2020) “Fiducial aided calibration of a displacement laser probing system for in-situ measurement of optical freeform surfaces on an ultra-precision fly-cutting machine”, OPTICS EXPRESS, 28(19), p.27415-p.27432.
  22. Kong, LB; Ma, YG; Ren, MJ; Xu, M; Cheung, CA. (2020) “Generation and characterization of ultra-precision compound freeform surfaces”, SCIENCE PROGRESS, 103(1), 0036850419880112.
  23. Zhao, CY; Cheung, CF; Xu, P. (2020) “High-efficiency sub-microscale uncertainty measurement method using pattern recognition”, ISA TRANSACTIONS, 101, p.503-p.514.
  24. Meng, ZG; Li, GJ; Yiu, SC; Zhu, NY; Yu, ZQ; Leung, CW; Manners, I; Wong, WY. (2020) “Nanoimprint Lithography-Directed Self-Assembly of Bimetallic Iron-M (M=Palladium, Platinum) Complexes for Magnetic Patterning”, ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 59(28), p.11521-p.11526.
  25. Fu, YX; Zhao, ZJ; Yip, W; To, S. (2020) “Novel fabrication of a hierarchical structured surface with improved corrosion inhibition by using hydrothermal synthesis and ultraprecision machining”, SURFACE & COATINGS TECHNOLOGY, 385, 125432.
  26. Xu, P; Cheung, CF; Wang, CJ; Zhao, CY. (2020) “Novel hybrid robot and its processes for precision polishing of freeform surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 64, p.53-p.62.
  27. Liu, MY; Cheung, CF; Senin, N; Wang, SX; Su, R; Leach, R. (2020) “On-machine surface defect detection using light scattering and deep learning”, JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 37(9), p.B53-p.B59.
  28. Zhao, CY; Cheung, CF; Xu, P. (2020) “Optical nanoscale positioning measurement with a feature-based method”, OPTICS AND LASERS IN ENGINEERING, 134, 106225.
  29. Zhong, H; Zhu, ZR; You, P; Lin, J; Cheung, CF; Lu, VL; Yan, F; Chan, CY; Li, GJ. (2020) “Plasmonic and Superhydrophobic Self-Decontaminating N95 Respirators”, ACS NANO, 14(7), p.8846-p.8854.
  30. Yip, WS; To, S. (2020) “Preliminary investigation on ultra-precision diamond turning of titanium alloys using thermoelectric cooler fixture”, JOURNAL OF MANUFACTURING PROCESSES, 58, p.187-p.192.
  31. Zhong, H; Zhu, ZR; Lin, J; Cheung, CF; Lu, VL; Yan, F; Chan, CY; Li, GJ. (2020) “Reusable and Recyclable Graphene Masks with Outstanding Superhydrophobic and Photothermal Performances”, ACS NANO, 14(5), p.6213-p.6221.
  32. Zhang, GQ; Ran, JQ; To, S; Wu, XY; Huang, P; Kuz'min, MP. (2020) “Size effect on surface generation of multiphase alloys in ultra-precision fly cutting”, JOURNAL OF MANUFACTURING PROCESSES, 60, p.23-p.36.
  33. Yip, WS; To, S; Zhou, HT. (2020) “Social network analysis for optimal machining conditions in ultra-precision manufacturing”, JOURNAL OF MANUFACTURING SYSTEMS, 56, p.93-p.103.
  34. Peng, QM; Sun, Y; Wang, J; Zu, Q; Yang, M; Fu, H. (2020) “Structural characteristics of {10(1)over-bar1} contraction twin-twin interaction in magnesium”, ACTA MATERIALIA, 192, p.60-p.66.
  35. Yip, WS; To, S. (2020) “Sustainable Ultra-Precision Machining of Titanium Alloy Using Intermittent Cutting”, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 7(2), p.361-p.373.
  36. Ke, XL; Qiu, L; Wang, CJ; Wang, ZZ. (2020) “Tentative Investigations on Reducing the Edge Effects in Pre-Polishing the Optics”, APPLIED SCIENCES-BASEL, 10(15), 5286.
  37. Chau, SY; To, S; Sun, ZW; Wu, HB. (2020) “Twinned-serrated chip formation with minor shear bands in ultra-precision micro-cutting of bulk metallic glass”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 107(11-12), p.4437-p.4448.
  38. Huang, ZJ; Tsui, GCP; Deng, Y; Tang, CY. (2020) “Two-photon polymerization nanolithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications”, NANOTECHNOLOGY REVIEWS, 9(1), p.1118-p.1136.
  39. Wang, SX; Cheung, B; Ren, MJ. (2020) “Uncertainty analysis of a fiducial-aided calibration and positioning system for precision manufacturing of optical freeform optics”, MEASUREMENT SCIENCE AND TECHNOLOGY, 31(6), 65012.

 

-2019-
  1. Bai, PF; Yang, XC; Shen, XM; Zhang, XN; Li, ZZ; Yin, Q; Jiang, GL; Yang, F. (2019) “Sound absorption performance of the acoustic absorber fabricated by compression and microperforation of the porous metal”, MATERIALS & DESIGN, 167, 107637.
  2. Xu, P; Cheung, BCF; Li, B. (2019) “A Complete, Continuous, and Minimal Product of Exponentials-Based Model for Five-Axis Machine Tools Calibration With a Single Laser Tracker, an R-Test, or a Double Ball-Bar”, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 141(4), 41010.
  3. Wang, SX; Cheung, CF; Liu, MY. (2019) “A fiducial-aided data fusion method for the measurement of multiscale complex surfaces”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(1-4), p.1381-p.1389.
  4. Zhao, ZJ; To, S; Yip, WS; Zhuang, ZX. (2019) “A rapid method for grain growth of Ti6Al4V alloy and its machinability”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 104(5-8), p.2347-p.2361.
  5. Zhang, SJ; Li, Z; Xiong, ZW; To, S. (2019) “A theoretical and experimental study of forced spindle vibration under unbalanced magnetic forces in ultra-precision machining”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4689-p.4694.
  6. Zhang, SJ; Zhou, YP; Zhang, HJ; Xiong, ZW; To, S. (2019) “Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 142, p.16-p.41.
  7. Li, GJ; Mo, XY; Wang, YL; Chan, CY; Chan, KC. (2019) “All 3D-Printed Superhydrophobic/Oleophilic Membrane for Robotic Oil Recycling”, ADVANCED MATERIALS INTERFACES, 6(18), 1900874.
  8. Sun, ZW; To, S; Wang, SJ. (2019) “An analytical force model for ultra-precision diamond sculpturing of micro-grooves with textured surfaces”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 160, p.129-p.139.
  9. Sun, ZW; To, S; Yu, KM. (2019) “An investigation in the ultra-precision fly cutting of freeform surfaces on brittle materials with high machining efficiency and low tool wear”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101(5-8), p.1583-p.1593.
  10. Ji, RJ; Zheng, Q; Liu, YH; To, S; Yip, WS; Yang, ZL; Jin, H; Wang, HY; Cai, BP; Cheng, WH. (2019) “An investigation of mechanical-thermal coupling treatment on material properties, surface roughness, and cutting force of Inconel 718”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105(5-6), p.1917-p.1931.
  11. Yip, WS; To, S. (2019) “Control of the ductile and brittle behavior of titanium alloys in diamond cutting by applying a magnetic field”, SCIENTIFIC REPORTS, 9, 4056.
  12. Zhu, ZW; To, S; Zhu, WL; Huang, P; Zhou, XQ. (2019) “Cutting forces in fast-/slow tool servo diamond turning of micro-structured surfaces”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 136, p.62-p.75.
  13. Yip, WS; To, S; Wang, WK. (2019) “Design of an optical lens for LED lighting using a hybrid principal components analysis-Taguchi method”, LIGHTING RESEARCH & TECHNOLOGY, 51(5), p.788-p.802.
  14. Liu, MY; Cheung, CF; Feng, XB; Wang, CJ. (2019) “Diamond machining of freeform-patterned surfaces on precision rollers”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4423-p.4431.
  15. Meng, ZG; Xiao, F; Wei, ZX; Guo, XY; Zhu, Y; Liu, YR; Li, GJ; Yu, ZQ; Shao, MH; Wong, WY. (2019) “Direct synthesis of L1(0)-FePt nanoparticles from single-source bimetallic complex and their electrocatalytic applications in oxygen reduction and hydrogen evolution reactions”, NANO RESEARCH, 12(12), p.2954-p.2959.
  16. Zhou, J; Li, LH; Ng, MC; Lee, WB. (2019) “Effect of molding machine's stiffness on the thickness of molded glass rings”, INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE, 10(4), p.584-p.597.
  17. Zhao, Z; Dong, ZW; Wu, HB. (2019) “Effect of particle size on the ultraprecision polishing process of titanium alloy Ti6Al4V”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 233(13), p.4490-p.4496.
  18. Pei, L; Wu, HB. (2019) “Effect of ultrasonic vibration on ultra-precision diamond turning of Ti6Al4V”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(1-4), p.433-p.440.
  19. Zhang, QL; Guo, N; Chen, Y; To, S. (2019) “Effects of binder concentration on the nanometric surface characteristics of WC-Co materials in ultra-precision grinding”, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 85, 105048.
  20. Zhao, ZJ; To, S; Xiao, GB; Jelenkovic, EV. (2019) “Effects of cutting angles on deformation of single crystal silicon in plunge cutting along < 1 0 0 > direction”, MATERIALS LETTERS, 253, p.234-p.237.
  21. Zhao, ZJ; To, SE; Wang, JW. (2019) “Effects of grains and twins on deformation of commercial pure titanium in ultraprecision diamond turning”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271, p.10-p.22.
  22. Yip, WS; To, S. (2019) “Effects of magnetic field on microstructures and mechanical properties of titanium alloys in ultra-precision diamond turning”, MATERIALS RESEARCH EXPRESS, 6(5), 56553.
  23. Sun, ZW; To, SE; Yu, KM. (2019) “Feasibility investigation on ductile machining of single-crystal silicon for deep micro-structures by ultra-precision fly cutting”, JOURNAL OF MANUFACTURING PROCESSES, 45, p.176-p.187.
  24. Sun, ZW; To, S; Zhang, GQ; Zhang, SJ. (2019) “Flexible fabrication of micro-optics arrays with high-aspect-ratio by an offset-tool-servo diamond machining system”, OPTICS EXPRESS, 27(7), p.9631-p.9646.
  25. Liu, MY; Cheung, CF; Feng, X; Ho, LT; Yang, SM. (2019) “Gaussian process machine learning-based surface extrapolation method for improvement of the edge effect in surface filtering”, MEASUREMENT, 137, p.214-p.224.
  26. Lu, GX; Liu, H; Lin, CH; Zhang, Z; Shukla, P; Zhang, YK; Yao, JH. (2019) “Improving the fretting performance of aero-engine tenon joint materials using surface strengthening”, MATERIALS SCIENCE AND TECHNOLOGY, 35(15), p.1781-p.1788.
  27. Yang, HP; Zhang, X; Chen, P; Fu, MW; Wang, GC; To, S. (2019) “Investigation on the enhanced maximum strain rate sensitivity (m) superplasticity of Mg-9Li-1Al alloy by a two-step deformation method”, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 764, 138219.
  28. Han, JD; Li, LH; Lee, W. (2019) “Machining of Lenticular Lens Silicon Molds with a Combination of Laser Ablation and Diamond Cutting”, MICROMACHINES, 10(4), 250.
  29. Zhao, ZJ; To, S; Sun, ZW; Ji, RJ; Yu, KM. (2019) “Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning”, JOURNAL OF MANUFACTURING PROCESSES, 39, p.58-p.68.
  30. Zhang, SJ; Li, Z; Xiong, ZW; To, S. (2019) “Microwave formation mechanisms in surface generation of ultra-precision machining”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 104(1-4), p.1239-p.1244.
  31. Li, LH; Chan, MK; Lee, WB; Ng, MC; Chan, KL. (2019) “Modeling and experimental performance analysis of a novel heating system and its application to glass hot embossing technology”, OPTICS LETTERS, 44(14), p.3454-p.3457.
  32. Zhu, ZW; To, S; Tong, Z; Zhuang, ZX; Jiang, XQ. (2019) “Modulated diamond cutting for the generation of complicated micro/nanofluidic channels”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 56, p.136-p.142.
  33. Zhao, CY; Cheung, CF; Liu, MY. (2019) “Nanoscale measurement with pattern recognition of an ultra-precision diamond machined polar microstructure”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 56, p.156-p.163.
  34. Chen, S; Cheung, C.F;Zhang, F; Liu, M. (2019) “Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces”, Nanomanufacturing and Metrology, 2(4), p.215-p.224.
  35. Yang, XC; Shen, XM; Bai, PF; He, XH; Zhang, XN; Li, ZZ; Chen, L; Yin, Q. (2019) “Preparation and Characterization of Gradient Compressed Porous Metal for High-Efficiency and Thin-Thickness Acoustic Absorber”, MATERIALS, 12(9), 1413.
  36. Yip, WS; To, S. (2019) “Reduction of Minimum Cutting Thickness of Titanium Alloys in Micro Cutting by a Magnetic Field Assistance”, IEEE ACCESS, 7, p.152034-p.152041.
  37. Yip, WS; To, S. (2019) “Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(5-8), p.1799-p.1809.
  38. Zhang, QL; Zhang, Z; Su, HH; Zhao, QL; To, S. (2019) “Role of Si in the Surface Damage Mechanism of RB-SiC/Si Under Mechanical Loading”, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 28(1), p.254-p.262.
  39. Zhao, ZJ; To, S; Zhuang, ZX. (2019) “Serrated Chips Formation in Micro Orthogonal Cutting of Ti6Al4V Alloys with Equiaxial and Martensitic Microstructures”, MICROMACHINES, 10(3), 197.
  40. Zhang, GQ; To, S; Wu, XY; Lou, Y. (2019) “Steady tool wear and its influence on tool geometry in ultra-precision fly cutting of CuZn30”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101(9-12), p.2653-p.2662.
  41. Hu, KM; Lo, SL; Wu, HB; To, S. (2019) “Study on Influence of Ultrasonic Vibration on the Ultra-Precision Turning of Ti6Al4V Alloy Based on Simulation and Experiment”, IEEE ACCESS, 7, p.33640-p.33651.
  42. Chen, SS; Fai, CC; Zhang, FH; Ting, HL; Zhao, CY. (2019) “Theoretical and experimental investigation of a tool path control strategy for uniform surface generation in ultra-precision grinding”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4307-p.4315.
  43. Yip, WS; To, S. (2019) “Theoretical and Experimental Investigations of Tool Tip Vibration in Single Point Diamond Turning of Titanium Alloys”, MICROMACHINES, 10(4), 231.
  44. Zhang, GQ; Dai, YQ; To, S; Wu, XY; Lou, Y. (2019) “Tool interference at workpiece centre in single-point diamond turning”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 151, p.1-p.12.
  45. Fang, FZ; Zhang, N; Guo, DM; Ehmann, K; Cheung, B; Liu, K; Yamamura, K. (2019) “Towards atomic and close-to-atomic scale manufacturing”, INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 1(1), 12001.
  46. Zhu, ZW; Tong, Z; To, S; Jiang, XQ. (2019) “Tuned diamond turning of micro-structured surfaces on brittle materials for the improvement of machining efficiency”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 68(1), p.559-p.562.

 

-2018-
  1. Sun, ZW; To, S; Zhang, SJ. (2018) “A novel ductile machining model of single-crystal silicon for freeform surfaces with large azimuthal height variation by ultra-precision fly cutting”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 135, p.1-p.11.
  2. Liu, MY; Cheung, CF; Feng, X; Wang, CJ; Leach, RK. (2018) “A self-calibration rotational stitching method for precision measurement of revolving surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 54, p.60-p.69.
  3. Zhang, QL; Zhao, QL; Su, HH; To, S. (2018) “A systematic investigation on the diamond wear mechanism during the dry scratching of WC/Co”, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 70, p.184-p.190.
  4. Zhang, SJ; Yu, JJ; To, S; Xiong, ZW. (2018) “A theoretical and experimental study of spindle imbalance induced forced vibration and its effect on surface generation in diamond turning”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 133, p.61-p.71.
  5. Chen, SS; Cheung, CF; Zhang, FH. (2018) “An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 97(5-8), p.2715-p.2729.
  6. Zhao, ZJ; To, S. (2018) “An investigation of resolved shear stress on activation of slip systems during ultraprecision rotary cutting of local anisotropic Ti-6Al-4V alloy: Models and experiments”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 134, p.69-p.78.
  7. Cheung, CF; Wang, CJ; Ho, LT; Chen, JB. (2018) “Curvature-adaptive multi-jet polishing of freeform surfaces”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 67(1), p.357-p.360.
  8. Jelenkovic, EV; To, S; Chen, L; Xiao, GB; Zhao, ZJ; Tang, CY. (2018) “Cutting properties of deposited amorphous silicon in ultra-precision machining”, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 28(9), 95013.
  9. Tang, H; Gao, J; Chen, X; Yu, KM; To, S; He, YB; Chen, X; Zheng, ZH; He, SF; Chen, CB; Li, YM. (2018) “Development and Repetitive-Compensated PID Control of a Nanopositioning Stage With Large-Stroke and Decoupling Property”, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 65(5), p.3995-p.4005.
  10. Cheung, CF; Wang, CJ; Cao, ZC; Ho, LT; Liu, MY. (2018) “Development of a multi jet polishing process for inner surface finishing”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 52, p.112-p.121.
  11. Huang, P; To, S; Zhu, ZW. (2018) “Diamond turning of micro-lens array on the roller featuring high aspect ratio”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 96(5-8), p.2463-p.2469.
  12. Yip, WS; To, S. (2018) “Ductile and brittle transition behavior of titanium alloys in ultra-precision machining”, SCIENTIFIC REPORTS, 8, 3934.
  13. Sun, ZW; To, S. (2018) “Effect of Machining Parameters and Tool Wear on Surface Uniformity in Micro-Milling”, MICROMACHINES, 9(6), 268.
  14. Zhang, SJ; To, S; Rao, XX. (2018) “Effects of cutting speed on phase changes in ultra-precision raster milling of Zn-Al alloy”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 232(1), p.31-p.41.
  15. Ji, RJ; Liu, YH; To, S; Jin, H; Yip, WS; Yang, ZL; Zheng, C; Cai, BP. (2018) “Efficient fabrication of gradient nanostructure layer on surface of commercial pure copper by coupling electric pulse and ultrasonics treatment”, JOURNAL OF ALLOYS AND COMPOUNDS, 764, p.51-p.61.
  16. Zhu, ZW; To, S; Li, YM; Zhu, WL; Bian, LX. (2018) “External force estimation of a piezo-actuated compliant mechanism based on a fractional order hysteresis model”, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 110, p.296-p.306.
  17. Yuan, W; Li, LH; Lee, WB; Chan, CY. (2018) “Fabrication of Microlens Array and Its Application: A Review”, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 31(1), 16.
  18. Wu, ZL; Tang, H; He, SF; Gao, J; Chen, X; To, SE; Li, YM; Yang, ZJ. (2018) “Fast dynamic hysteresis modeling using a regularized online sequential extreme learning machine with forgetting property”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 94(9-12), p.3473-p.3484.
  19. Wang, SX; Cheung, CF; Ren, MJ; Liu, MY. (2018) “Fiducial-aided on-machine positioning method for precision manufacturing of optical freeform surfaces”, OPTICS EXPRESS, 26(15), p.18928-p.18943.
  20. Wang, SX; Cheung, CF; Ren, MJ; Liu, MY. (2018) “Fiducial-Aided Robust Positioning of Optical Freeform Surfaces”, MICROMACHINES, 9(2), 52.
  21. Ren, MJ; Cheung, CF; Xiao, GB. (2018) “Gaussian Process Based Bayesian Inference System for Intelligent Surface Measurement”, SENSORS, 18(11), 4069.
  22. Cheung, CF; Liu, MY; Leach, R; Feng, XB; Zhao, CY. (2018) “Hierarchical-information-based characterization of multiscale structured surfaces”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 67(1), p.539-p.542.
  23. Wang, JW; Zhao, ZJ; Song, SH; Ma, Q; Liu, RC. (2018) “High Performance Poly(vinyl alcohol)-Based Li-Ion Conducting Gel Polymer Electrolyte Films for Electric Double-Layer Capacitors”, POLYMERS, 10(11), 1179.
  24. Wang, JW; Zhao, ZJ; Muchakayala, R; Song, SH. (2018) “High-performance Mg-ion conducting poly(vinyl alcohol) membranes: Preparation, characterization and application in supercapacitors”, JOURNAL OF MEMBRANE SCIENCE, 555, p.280-p.289.
  25. Gu, W; Zhu, ZW; Zhu, WL; Lu, LY; To, S; Xiao, GB. (2018) “Identification of the critical depth-of-cut through a 2D image of the cutting region resulting from taper cutting of brittle materials”, MEASUREMENT SCIENCE AND TECHNOLOGY, 29(5), 55003.
  26. Zhao, CY; Cheung, CF; Liu, MY. (2018) “Integrated polar microstructure and template-matching method for optical position measurement”, OPTICS EXPRESS, 26(4), p.4330-p.4345.
  27. Yang, G; Li, LH; Lee, WB; Ng, MC; Chan, CY. (2018) “Investigation of the heating behavior of carbide-bonded graphene coated silicon wafer used for hot embossing”, APPLIED SURFACE SCIENCE, 435, p.130-p.140.
  28. Han, JD; Li, LH; Lee, WB. (2018) “Investigation on the effects of laser heating on surface quality of OFHC copper in diamond cutting process”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 54, p.294-p.301.
  29. To, S; Jelenkovic, EV; Goncharova, LV; Wong, SF. (2018) “Mechanical characteristics of hydrogen-implanted crystalline silicon after post-implantation annealing”, VACUUM, 152, p.40-p.46.
  30. Cao, ZC; Cheung, CF; Liu, MY. (2018) “Model-based self-optimization method for form correction in the computer controlled bonnet polishing of optical freeform surfaces”, OPTICS EXPRESS, 26(2), p.2065-p.2078.
  31. Lin, ZQ; Wang, SJ; Chen, XD; To, SE; Yin, ZQ; Liu, JH. (2018) “Modeling and prediction of surface topography with three tool-work vibration components in single-point diamond turning”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 98(5-8), p.1627-p.1639.
  32. Sun, ZW; To, S; Yu, KM. (2018) “One-step generation of hybrid micro-optics with high-frequency diffractive structures on infrared materials by ultra-precision side milling”, OPTICS EXPRESS, 26(21), p.28161-p.28177.
  33. Zhu, ZW; To, S; Zhu, WL; Li, YM; Huang, P. (2018) “Optimum Design of a Piezo-Actuated Triaxial Compliant Mechanism for Nanocutting”, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 65(8), p.6362-p.6371.
  34. Zhang, QL; Zhao, QL; To, S; Guo, B; Rao, ZM. (2018) “Precision machining of 'water-drop' surface by single point diamond grinding”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 51, p.190-p.197.
  35. Che, DM; Zhang, WZ; Zhu, ZW; Ehmann, KF. (2018) “Rock fails in shearing as a tuned critical system”, INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 110, p.133-p.139.
  36. Yang, G; Li, LH; Lee, WB; Ng, MC. (2018) “Structure of graphene and its disorders: a review”, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 19(1), p.613-p.648.
  37. Zhang, QL; Fu, YC; Su, HH; Zhao, QL; To, S. (2018) “Surface damage mechanism of monocrystalline silicon during single point diamond grinding”, WEAR, 396, p.48-p.55.
  38. Yip, WS; To, S. (2018) “Sustainable manufacturing of ultra-precision machining of titanium alloys using a magnetic field and its sustainability assessment”, SUSTAINABLE MATERIALS AND TECHNOLOGIES, 16, p.38-p.46.
  39. Sun, ZW; To, S; Zhang, SJ; Zhang, GQ. (2018) “Theoretical and experimental investigation into non-uniformity of surface generation in micro-milling”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 140, p.313-p.324.
  40. Zhao, CY; Cheung, CF. (2018) “Theoretical and experimental investigation of the effect of the machining process chain on surface generation in ultra-precision fly cutting”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 99(9-12), p.2819-p.2831.
  41. Chen, SS; Cheung, CF; Zhang, FH; Zhao, CY. (2018) “Three-dimensional modelling and simulation of vibration marks on surface generation in ultra-precision grinding”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 53, p.221-p.235.
  42. Li, D; Cheung, CF; Wang, B; Liu, MY. (2018) “A study of a priori knowledge-assisted multi-scopic metrology for freeform surface measurement”, Procedia CIRP, 75, p.337-p.342.

 

-2017-
  1. Ren, MJ; Kong, LB; Sun, LJ; Cheung, CF. (2017) “A Curve Network Sampling Strategy for Measurement of Freeform Surfaces on Coordinate Measuring Machines”, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 66(11), p.3032-p.3043.
  2. Liu, MY; Cheung, CF; Cheng, CH; Su, R; Leach, RK. (2017) “A Gaussian process and image registration based stitching method for high dynamic range measurement of precision surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 50, p.99-p.106.
  3. Wang, CJ; Cheung, CF; Ho, LT; Liu, MY; Lee, WB. (2017) “A novel multi jet polishing process and tool for high-efficiency polishing”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 115, p.60-p.73.
  4. Ren, MJ; Sun, LJ; Liu, MY; Cheung, CF; Yin, YH. (2017) “A Reconstruction-Registration Integrated Data Fusion Method for Measurement of Multiscaled Complex Surfaces”, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 66(3), p.414-p.423.
  5. Ren, MJ; Sun, LJ; Liu, MY; Cheung, CF; Yin, YH; Cao, YL. (2017) “A weighted least square based data fusion method for precision measurement of freeform surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 48, p.144-p.151.
  6. Yip, WS; To, S. (2017) “An application of eddy current damping effect on single point diamond turning of titanium alloys”, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 50(43), 435002.
  7. Zhang, QL; Zhao, QL; To, S; Guo, B. (2017) “Application of X-ray diffraction to study the grinding induced surface damage mechanism of WC/Co”, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 64, p.205-p.209.
  8. Zhang, SJ; To, S. (2017) “Deformation-induced phase changes of Zn-Al alloy during ultra-precision raster milling”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88(5-8), p.1755-p.1761.
  9. Zhu, ZW; To, S; Ehmann, KF; Zhou, XQ. (2017) “Design, Analysis, and Realization of a Novel Piezoelectrically Actuated Rotary Spatial Vibration System for Micro-/Nanomachining”, IEEE-ASME TRANSACTIONS ON MECHATRONICS, 22(3), p.1227-p.1237.
  10. Zhang, SJ; To, S; Zhang, GQ. (2017) “Diamond tool wear in ultra-precision machining”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88(1-4), p.613-p.641.
  11. Zhang, QL; Zhao, QL; To, SE; Guo, B; Zhai, WJ. (2017) “Diamond wheel wear mechanism and its impact on the surface generation in parallel diamond grinding of RB-SiC/Si”, DIAMOND AND RELATED MATERIALS, 74, p.16-p.23.
  12. Zhu, ZW; To, S; Zhu, WL; Huang, P. (2017) “Feasibility study of the novel quasi-elliptical tool servo for vibration suppression in the turning of micro-lens arrays”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 122, p.98-p.105.
  13. Wang, CJ; Cheung, CF; Liu, MY; Lee, WB. (2017) “Fluid jet-array parallel machining of optical microstructure array surfaces”, OPTICS EXPRESS, 25(19), p.22710-p.22725.
  14. Yuan, W; Chan, CY; Li, LH; Lee, WB. (2017) “Investigation of the surface profile along the cutting trajectory and its correlation with cutting forces in single point diamond turning”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 89(5-8), p.1327-p.1338.
  15. Han, JD; Li, LH; Chan, CY; Lee, WB. (2017) “Investigation on the formation of surface defects of OFHC copper in diamond micro-grooving process”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 93(9-12), p.4133-p.4141.
  16. Xu, P; Cheung, CF; Li, B; Ho, LT; Zhang, JF. (2017) “Kinematics analysis of a hybrid manipulator for computer controlled ultra-precision freeform polishing”, ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 44, p.44-p.56.
  17. Zhao, CY; Cheung, CF; Liu, MY. (2017) “Modeling and Simulation of a Machining Process Chain for the Precision Manufacture of Polar Microstructure”, MICROMACHINES, 8(12), 345.
  18. Wang, SJ; Chen, X; To, S; Chen, XD; Liu, Q; Liu, JW. (2017) “Modelling and prediction of the effect of cutting strategy on surface generation in ultra-precision raster milling”, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 30(9), p.895-p.909.
  19. Fung, KY; Tang, CY; Cheung, CF. (2017) “Molecular dynamics analysis of the effect of surface flaws of diamond tools on tool wear in nanometric cutting”, COMPUTATIONAL MATERIALS SCIENCE, 133, p.60-p.70.
  20. Jelenkovic, EV; To, S; Goncharova, LV; Wong, SF. (2017) “Nanoindentation of silicon implanted with hydrogen: effect of implantation dose on silicon's mechanical properties and nanoindentation-induced phase transformation”, MATERIALS RESEARCH EXPRESS, 4(7), 75013.
  21. Wang, CJ; Cheung, CF; Liu, MY. (2017) “Numerical modeling modeling and experimentation of three dimensional material removal characteristics in fluid jet polishing”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 133, p.568-p.577.
  22. Zhou, J; Li, LH; Gong, F; Liu, K. (2017) “Quality dependence study on dimensions for plano-concave molded glass lenses”, INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE, 8(3), p.266-p.275.
  23. Yip, WS; To, S. (2017) “Reduction of material swelling and recovery of titanium alloys in diamond cutting by magnetic field assistance”, JOURNAL OF ALLOYS AND COMPOUNDS, 722, p.525-p.531.
  24. Zhang, GQ; To, S. (2017) “Relation between tool wear and workpiece modal vibration in ultra-precision raster fly cutting”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 93(9-12), p.3505-p.3515.
  25. Chen, SS; Cheung, CF; Zhao, CY; Zhang, FH. (2017) “Simulated and measured surface roughness in high-speed grinding of silicon carbide wafers”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 91(1-4), p.719-p.730.
  26. Yu, NH; Chan, CY; Li, LH; Lee, WB. (2017) “Spectral analysis of surface roughness features of a lapped ultraprecision single-point diamond machined surface”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88(5-8), p.1407-p.1415.
  27. Zhang, SJ; To, S. (2017) “Spindle vibration influencing form error in ultra-precision diamond machining”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 231(17), p.3144-p.3151.
  28. Xu, P; Li, B; Cheung, CF; Zhang, JF. (2017) “Stiffness Modeling and Optimization of a 3-DOF Parallel Robot in a Serial-Parallel Polishing Machine”, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 18(4), p.497-p.507.
  29. Jelenkovic, EV; To, S. (2017) “Suppression of Nanoindentation-Induced Phase Transformation in Crystalline Silicon Implanted with Hydrogen”, ELECTRONIC MATERIALS LETTERS, 13(5), p.393-p.397.
  30. Zhao, QL; Zhang, QL; To, SE; Guo, B. (2017) “Surface Damage Mechanism of Monocrystalline Si Under Mechanical Loading”, JOURNAL OF ELECTRONIC MATERIALS, 46(3), p.1862-p.1868.
  31. Cao, ZC; Cheung, CF; Ho, LT; Liu, MY. (2017) “Theoretical and experimental investigation of surface generation in swing precess bonnet polishing of complex three-dimensional structured surfaces”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 50, p.361-p.371.
  32. Ho, LT; Cheung, BCF; Kong, LB; Ren, MJ. (2017) “Theoretical and experimental investigation of three-dimensional-structured surface generation using fluid jet polishing”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 231(13), p.2317-p.2335.
  33. Yip, WS; To, S. (2017) “Tool life enhancement in dry diamond turning of titanium alloys using an eddy current damping and a magnetic field for sustainable manufacturing”, JOURNAL OF CLEANER PRODUCTION, 168, p.929-p.939.

 

We use Cookies to give you a better experience on our website. By continuing to browse the site without changing your privacy settings, you are consenting to our use of Cookies. For more information, please see our Privacy Policy Statement.

Your browser is not the latest version. If you continue to browse our website, Some pages may not function properly.

You are recommended to upgrade to a newer version or switch to a different browser. A list of the web browsers that we support can be found here