Introduction:
The Fujikura LZM-100 is a highly-precise splicing system that uses a CO2 laser heat source to perform splicing, adiabatic tapering or other glass shaping operations.
High precision glass processing is enabled by an intuitive and user-friendly on-board firmware. Operations may be performed manually or by PC control. An FPS PC control GUI, which is pre-installed in the all-in-one computer, is supplied with the LZM-100 to provide additional features, greater flexibility and finer control.
Specification & Features:
- CO2 laser heat source eliminates electrode or filament maintenance, provides very stable operation and greatly reduces the need for periodic calibration.
- High-strength splicing.
- Excellent performance for fiber splicing with dissimilar diameters.
- Intuitive FPS PC GUI: Easy to understand, navigate and operate.
- Automated laser safety features.
- Applicable fiber diameter for automatic alignment: 80 um to 2300 um.
- Maximum Z Travel Length: 150 mm (left plus right Z units).
Notes to user:
Training is required prior to operation by user.
User must complete the laser safety training (by HSEO) before using the equipment.
Supplier information:
Please click here to download the equipment introduction poster.
Equipment location:
Room EF405a
