Research Outputs (2013 - 2014)

Research book or monograph (author)

Academic research: refereed

Serial No.	Title/Brief Description	Author(s)
1	Yin Yang and organizational performance- Five Elements for improvement and success. 1st Ed, Springer SBM, UK, 55pp (2014) ISBN 978-1447163886 (print), 1447163885 (electronic)	LAW, KRIS M Y and KESTI, Marko

Chapter in an edited book (author)

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
2	"Green PCB Manufacturing Technologies". In Kauffman, Joanne; Lee, Kun Mo, ed., Handbook of Sustainable Engineering, Springer, Netherlands, pp.301-322 (2013) ISBN 978-1-4020-8938-1	YUNG, K.C.

Chapter in an edited book (author)

Academic research: refereed

Serial No.	Title/Brief Description	Author(s)
3	"Optimizing Decision Making in the Apparel Supply Chain Using Artificial Intelligence (AI)". In Wong, W.K., Ed., Optimizing fabric spreading and cutting schedules in apparel production using genetic algorithms and fuzzy set theory, Elsevier, nil, pp.132-152 (2013) ISBN 9780857097798 (print), 978-0-85709-779-8 (electronic)	WONG, W.K., KWONG, C.K., MOK, P.Y. and IP, W.H.

Textbook (author)

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
4	生醫物聯網技術與系統設計. 1st Ed, Dmatek Co., Ltd. (長高科技股份有限公司), Taichung City, Taiwan, 340pp (2014) ISBN 978-986-84784-7-3 (print)	IP, W.H., TSENG, K.K., ZENG, Fufu and WU, C.H.

Publication in refereed journal

Academic research: refereed

Serial No.	Title/Brief Description	Author(s)
5	"A Chaotic Bee Colony approach for supplier selection-order allocation with different discounting policies in a coopetitive multi-echelon supply chain". Journal of Intelligent Manufacturing, Vol. 24, No. 15 (Nov 2013) ISSN 0956-5515 (print), 1572-8145 (electronic) (link) (on-line publication)	JAIN, Vipul, KUNDU, Anirban, CHAN, FTS and PATEL, Mukesh
6	"A Computational Narrative Simulation System for Constructing Multi-linear Narratives in Knowledge Managemen". Journal of Knowledge Management Practice, Vol. 14, No. 3, pp.1-18 (Sep 2013) ISSN 1705-9232 (electronic) (link)	WANG, W.M. and CHEUNG, C.F.
7	"A Genetic Algorithm-based optimization model for supporting green transportation operations". Expert Systems with Applications, Vol. 41, No. 7, pp.3284-3296 (Jun 2014) ISSN 09574174 (print) (link)	LIN, Canhong#, CHOY, K.L., HO, G.T.S. and NG, T.W.
8	"A Knowledge-Based System for Assessing and Managing Intellectual Property Managerial Risks for Small-and-Medium Sized Technological Enterprises". International Journal of Intellectual Property Management, Vol. 7, No. 1/2, pp.57-83 (2014) ISSN 1478-9647 (print), 1478-9655 (electronic)	CHEUNG, C.F., WANG, W.M., XU, X. and WILLOUGHBY, Kelvin W.
9	"A Modified Dynamic Evolving Neural-Fuzzy Approach to Modeling Customer Satisfaction for Affective Design". The Scientific World Journal, Vol. 2013 (Dec 2013) ISSN 2356-6140(print), 1537-744X(electronic) (Online publication, article ID: 636948)	KWONG, C.K., FUNG, kai yin#, JIANG, huimin, CHAN, K. Y. and SIU, KIN WAI MICHAEL
10	"A NOTE ON "SCHEDULING PROBLEMS WITH THE EFFECTS OF DETERIORATION AND LEARNING"". Asia-Pacific Journal of Operational Research, Vol. 31, No. 03, pp.1450011 (Jun 2014) ISSN 0217-5959 (print), 1793-7019 (electronic) (link)	WU, YU-BIN, HUANG, X, LI, LIN and JI, P.
11	"A Physarum Polycephalum optimization algorithm for the bi-objective shortest path problem". International Journal of Unconventional Computing, Vol. 10, No. 1-2, pp.143-162 (2014)	ZHANG, X, WANG, Q, CHAN, F.T.S., MAHADEVAN, S and DENG, Y
12	"A Theoretical and Experimental Investigation of Design and Slow Tool Servo Machining of Freeform Progressive Addition Lenses (PALs) for Optometric Applications". Internaional Journal of Advanced Manufacturing Technology, Vol. 72, No. 1-4, pp.33-40 (Apr 2014) ISSN 0268-3768 (print), 1433-3015 (electronic)	KONG, L.B., CHEUNG, C.F., TO, S., WANG, B. and HO, L.T.
13	"A guided search genetic algorithm using mined rules for optimal affective product design". Engineering Optimization, Vol. 46, No. 8, pp.1094-1108 (2014) ISSN 0305-215X (print), 1029-0273 (electronic) (link)	FUNG, Chris K.Y.#, KWONG, C.K., CHAN, Kit Yan and JIANG, H.
14	"A knowledge-based ingredient formulation system for chemical product development in the personal care industry". Computers & Chemical Engineering, Vol. 65, pp.40-53 (Jun 2014) ISSN 00981354 (print) (link)	LEE, C.K.H.#, CHOY, K.L. and CHAN, Y.N.
15	"A modified genetic algorithm for maximizing handling reliability and recyclability of distribution centers". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 40, No. 18, pp.7588-7595 (2013)	CHUNG, SH, CHAN, HK and CHAN, FTS
16	"A modified multi-criterion optimization genetic algorithm for order distribution in collaborative supply chain". APPLIED MATHEMATICAL MODELLING, Vol. 37, No. 14-15, pp.7855-7864 (2013)	ZHANG, H, DENG, Y, CHAN, FTS and ZHANG, X
17	"A novel 3D model retrieval approach using combined shape distribution". Multimedia tools and applications, Vol. 69, No. 3, pp.799-818 (Apr 2014) ISSN 1380-7501 (print), 1573-7721 (electronic) (link)	ZOU, Kuan-Sheng, IP, W.H., WU, C.H., CHEN, Zeng-Qiang, YUNG, K.L. and CHAN, CY
18	"A novel spindle inclination error identification and compensation method in ultra-precision raster milling". International Journal of Machine Tools and Manufacture, Vol. 78, pp.8-17 (Mar 2014) ISSN 08906955(print) (link)	ZHANG, Guoqing#, TO, S. and XIAO, Gaobo#
19	"A real-time risk control and monitoring system for incident handling in wine storage". Expert Systems with Applications, Vol. 40, No. 9, pp.3665-3678 (Jul 2013) ISSN 09574174 (print) (link)	LAM, H.Y.#, CHOY, K.L., HO, G.T.S., KWONG, C.K. and LEE, CKM
20	"A review on manufacturing flexibility". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 9, pp.5946-5970 (2013)	JAIN, A, JAIN, PK, CHAN, FTS and SINGH, S
21	"A theoretical and experimental study of surface generation under spindle vibration in ultra-precision raster milling". International Journal of Machine Tools and Manufacture, Vol. 75, pp.36-45 (Dec 2013) ISSN 08906955 (print) (link)	ZHANG, S.J. and TO, S.
22	"A workload balancing genetic algorithm for quay crane scheduling problem". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 16, pp.4820-4834 (2013)	CHUNG, SH and CHAN, FTS
23	"Aircraft Ground Service Scheduling Problems and Their Genetic Algorithm With Hybrid Assignment and Sequence Encoding Scheme". IEEE systems journal, Vol. 7, No. 4, pp.649-657 (Dec 2013) ISSN 1932-8184 (print), 1937-9234 (electronic) (link)	IP, W.H., WANG, Dingwei and CHO, V.
24	"An Adaptive CUSUM Chart with Single Sample Size for Monitoring Process Mean and Variance". Quality and Reliability Engineering International, Vol. 29, No. 7, pp.1027-1039 (Aug 2013) ISSN 07488017 (print) (link)	OU, Yanjing, WU, Zhang, LEE, CKM and WU, Kan
25	"An Integrated Model of Material Supplier Selection and Order Allocation Using Fuzzy Extended AHP and Multiobjective Programming". Mathematical Problems in Engineering, Vol. 2013, pp.1-14 (2013) ISSN 1024-123X (print), 1563-5147 (electronic) (link)	LI, Zhi, WONG, W.K. and KWONG, C.K.
26	"An Overview of Ultra-precision Diamond Machining of Microstructured Freeform Surfaces". Journal of Mechanical Engineering, Vol. 49, No. 19, pp.144-155 (Oct 2013) ISSN 0577-6686 (print) (link)	LEE, W.B., KONG, L.B., CHEUNG, C.F., TO, S., CHEN, X. and LIU, Q.
27	"An attribute chart for monitoring the process mean and variance". International Journal of Production Research, Vol. 52, No. 11, pp.3366-3380 (Jan 2014) ISSN 0020-7543 (print), 1366-588X (electronic) (link)	HARIDY, Salah, WU, Zhang, LEE, CKM and RAHIM, M. Abdur
28	"An improved physarum polycephalum algorithm for the shortest path problem". THE SCIENTIFIC WORLD JOURNAL, Vol. 2014, pp.1-9 (2014)	ZHANG, X, WANG, Q, ADAMATZKYD, A, CHAN, F.T.S., MAHADEVANC, and DENG, Y
29	"An innovation approach for achieving cost optimization in supply chain management". Journal of Intelligent and Fuzzy Systems, Vol. 26, No. 1, pp.173-192 (2014) ISSN 1064-1246 (print), 1875-8967 (electronic) (DOI 10.3233/IFS-120725)	LAU, HCW, HO, G.T.S., CHAN, TM and TSUI, WT
30	"An innovative supply chain performance measurement system incorporating Research and Development (R&D) and marketing policy". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 69, pp.64-70 (2014)	CHAN, F.T.S., NAYAK, A, RAJ, R, CHONG, A.Y.L. and TIWARI, M.K.
31	"An order-picking operations system for managing the batching activities in a warehouse". International Journal of Systems Science, Vol. 45, No. 6, pp.1283-1295 (Jun 2014) ISSN 0020-7721 (print), 1464-5319 (electronic) (link)	LAM, Cathy H.Y.#, CHOY, K.L., HO, G.T.S. and LEE, C.K.M.
32	"Analysis of flexible decision strategies for sustainability-focused green product recovery system". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 11, pp.3428-3442 (2013)	MANGLA, S, MADAAN, J and CHAN, FTS
33	"Analysis of materials selected for multilayer diffractive optical elements". Optik - International Journal for Light and Electron Optics, Vol. 125, No. 13, pp.3245-3248 (2014) ISSN 00304026 (print) (link)	XUE, Changxi and TO, S.
34	"Analysis of the determinants of consumers’ m-commerce usage activities". ONLINE INFORMATION REVIEW, Vol. 37, No. 3, pp.443-461 (2013)	CHAN, FTS and CHONG, AYL
35	"Application of intelligent data management in resource allocation for effective operation of manufacturing systems.". Journal of Manufacturing Systems, Vol. 33, pp.412-422 (2014) ISSN 0278-6125 (print)	LAW, KRIS M Y, HO, G.T.S., CHOY, K.L. and LEE, Kar Hang#
36	"Assess the effects of different operations policies on warehousing reliability". International Journal of Production Research, Vol. 52, No. 3, pp.662-678 (Feb 2014) ISSN 0020-7543 (print), 1366-588X (electronic) (link)	CHOY, K.L., SHENG, N., LAM, H.Y.#, LAI, Ivan K.W., CHOW, K.H. and HO, G.T.S.
37	"Assessing a cross-border logistics policy using a performance measurement system framework: the case of Hong Kong and the Pearl River Delta region". International Journal of Systems Science, Vol. 45, No. 6, pp.1306-1320 (Jun 2014) ISSN 0020-7721 (print), 1464-5319 (electronic) (link)	WONG, David W.C., CHOY, K.L., CHOW, Harry K.H. and LIN, Canhong#
38	"Atmospheric RE-free Mg-based bulk metallic glass with high bio-corrosion resistance". JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 379, pp.107-111 (Nov 2013) ISSN 0022-3093(print), 1873-4812 (electronic)	GUO, SF, CHAN, KC, JIANG, XG, ZHANG, HJ, ZHANG, DF, WANG, JF, JIANG ,B and PAN, FS
39	"Automation and optimisation of Family Mould Cavity and Runner Layout Design (FMCRLD) using genetic algorithms and mould layout design grammars". Computer-Aided Design, Vol. 47, pp.118-133 (Feb 2014) ISSN 00104485 (print) (link)	CHAN, Ivan W.M., PINFOLD, Martyn, KWONG, C.K. and SZETO, W.H.
40	"Au–Cu2–Se Heterodimer Nanoparticles with Broad Localized Surface Plasmon Resonance as Contrast Agents for Deep Tissue Imaging". Nano Letters, Vol. 13, No. 9, pp.4333-4339 (Sep 2013) ISSN 1530-6984 (print), 1530-6992 (electronic) (link)	LIU, Xin, LEE, Changho, LAW, Wing-Cheung, ZHU, Dewei, LIU, Maixian, JEON, Mansik, KIM, Jeehyun, PRASAD, Paras N., KIM, Chulhong and SWIHART, Mark T.
41	"Buckling of metallic glass bars". JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 387, pp.1-5 (Mar 2014) ISSN 0022-3093 (print), 1873-4812 (electronic)	WANG, JG, CHAN, KC, FAN, JC, XIA, L, WANG, G and WANG, WH
42	"Bulk metallic glass composite with good tensile ductility, high strength and large elastic strain limit". Scientific Reports, Vol. 4 (Jun 2014) ISSN 2045-2322 (print) (On-line publication)	WU, Fu-Fa, CHAN, KC, JIANG, Song-Shan, CHEN, Shunhua# and WANG, Gang
43	"Chaos-Based Fuzzy Regression Approach to Modeling Customer Satisfaction for Product Design". IEEE Transactions on Fuzzy Systems, Vol. 21, No. 5, pp.926-936 (Oct 2013) ISSN 1063-6706 (print), 1941-0034 (electronic) (link)	JIANG, Huimin#, KWONG, C.K., IP, W.H. and CHEN, Zengqiang
44	"Characterization of poly(vinyl alcohol) (PVA)/ZnO nanocomposites prepared by a one-pot method". Composites Part B: Engineering, Vol. 60, pp.144-149 (Apr 2014) ISSN 13598368 (print) (link)	GONG, Xinghou, TANG, C.Y., PAN, Ling, HAO, Zhonghua and TSUI, C.P.
45	"Computational and systematic approaches in enhancing supply chain performance". International Journal of Systems Science, Vol. 45, No. 6, pp.1253-1254 (Jun 2014) ISSN 0020-7721 (print), 1464-5319 (electronic) (link)	CHOY, K.L., HO, George T.S. and KOH, S.C. Lenny
46	"Correlation between impact strength and fractal dimensions of fracture surface for PLLA/nano-CaCO3 composites". Polymer Testing, Vol. 35, pp.109-115 (May 2014) ISSN 01429418 (print) (link)	LIANG, Ji-Zhao, DUAN, De-Rong, TANG, C.Y. and TSUI, C.P.
47	"Covering of Nanofibers on Polystyrene and PS/C60 Nanofiber Films and the Effects on Light Absorption and Surface Wettabilities". IEEE Transactions on Nanotechnology, Vol. 12, No. 5, pp.659-661 (Sep 2013) ISSN 1536-125X (print), 1941-0085 (electronic) (link)	XU,Y AN, TIAN, WEI, CHEN, Wei, YUNG, K.L., HUANG, LONG-BIAO and KANG, CHUNLEI
48	"Customer Relationship Management and Interface Redesign:: A Study on the Website Design on the eBay Websites on Cultural Perspectives". International Journal of Strategic Information Technology and Applications, Vol. 4, No. 3, pp.68-88 (2013) ISSN 1947-3095 (print), 1947-3109 (electronic) (link)	HO, Kevin K.W. and SEE-TO, ERIC W.K.
49	"Customer needs in market-driven product development: product management and R&D standpoints.". Technology and Investments, Vol. 5, No. 1, pp.16-25 (2013) ISSN 2150-4059 (print)	LAW, KRIS M Y, MAJAVA, J and HAAPASALO, H
50	"Decentralised planning coordination with quantity discount contract in a divergent supply chain". International Journal of Production Research, Vol. 51, No. 9, pp.2776-2789 (2013) ISSN 0020-7543 (print)	OGIER, M, CUNG, V.D., BOISSIERE, J and CHUNG, SH
51	"Decision-making on multi-mould maintenance in production scheduling". International Journal of Production Research, Vol. 52, No. 19, pp.5640-5655 (2014) ISSN 0020-7543 (print), 1366-588X (electronic) (link)	WONG, C.S.#, CHAN, FTS and CHUNG, S.H.
52	"Deformation behavior of a Zr-based bulk metallic glass under a complex stress state". INTERMETALLICS, Vol. 43, pp.38-44 (Dec 2013) ISSN 0966-9795 (print), 1879-0216 (electronic)	CHEN, SH#, CHAN, KC and XIA, L
53	"Deformation behavior of bulk metallic glass structural elements". MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 606, pp.196-204 (Jun 2014) ISSN 0921-5093 (print), 1873-4936 (electronic)	CHEN, SH#, CHAN, KC and XIA, L
54	"Determination of Loading Paths in Warm Hydroforming Reinforced Quadrilateral Tubular Components". Materials and Manufacturing Processes, Vol. 29, pp.32-36 (Sep 2013) ISSN 1042-6914 (print)	WKR, Kot# and CHAN, LC
55	"Development of a module based service family design for mass customization of airline sector using the Coalition Game". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 66, No. 4, pp.827-833 (2013)	AGGARWAL, A, CHAN, FTS and TIWARI, MK
56	"Diffusion bonding of a Zr-based metallic glass in its supercooled liquid region". INTERMETALLICS, Vol. 46, pp.236-242 (Mar 2014) ISSN 0966-9795 (print), 1879-0216 (electronic)	WANG, JG, FAN, JC, ZHANG, YF, WANG, G, WANG, WH and CHAN, KC
57	"Effect of graphene doping on microstructural and mechanical properties of Sn-8Zn-3Bi solder joints together with electro-migration analysis". JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 580, pp.162-171 (2013)	HU, X, CHAN, YC, ZHANG, K and YUNG, KC
58	"Effect of stress gradient on the deformation behavior of a bulk metallic glass under uniaxial tension". MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 574, pp.262-265 (Jul 2013) ISSN 0921-5093 (print)	CHEN, SH#, CHAN, KC and XIA, L
59	"Electrochemical synthesis of transparent nanocrystalline Cu2O films using a reverse potential waveform". THIN SOLID FILMS, Vol. 550, pp.17-21 (Jan 2014) ISSN 0040-6090 (print)	HU, F., CHAN, K.C., YUE, T.M. and SURYA, C.
60	"Empirical Analysis of a Self-service Check-in Implementation in Singapore Changi Airport". International Journal of Engineering Business Management, pp.1 (Jan 2014) ISSN 1847-9790 (print)	NG, Yuankei, LEE, CKM, LV, Yaoqiong and TAEZOO, Park
61	"Enhanced electrochemical capacitance of polyaniline/graphene hybrid nanosheets with graphene as templates". Composites Part B: Engineering, Vol. 53, pp.376-381 (Oct 2013) ISSN 13598368 (print) (link)	DU, FP, WANG, Jing-Jing,TANG, C.Y.,TSUI, C.P., XIE, Xiao-Lin and YUNG, KF
62	"Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning". International Journal of Machine Tools and Manufacture, pp.62-70 (Oct 2013) ISSN 0890-6955 (print)	CHAN, C.Y., LEE, W.B. and WANG, H.
63	"Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting". International Journal of Machine Tools and Manufacture, Vol. 74, pp.50-55 (Nov 2013) ISSN 08906955 (print) (link)	TO, S., WANG, H. and JELENKOVICZ, EMIL V.
64	"Exploring customer definition and representation in market-driven NPD in ICT industry". International Journal of Business Development Research, Vol. 1, No. 2, pp.18-34 (Nov 2013) ISSN 1929-0977 (print)	LAW, KRIS M Y, MAJAVA, J, HAAPASALO, H and NUOTTILA, J
65	"Extrudate swell behavior of polypropylene composites filled with microencapsulated red phosphorus". Journal of Applied Polymer Science, Vol. 129, No. 6, pp.3497-3501 (2013) ISSN 00218995 (print) (link)	LIANG, Ji-Zhao, FENG, Jin-Qing, TSUI, C.P. and TANG, C.Y.
66	"FSJSP: A novel methodology for the job-shop scheduling problem based on intuitionistic fuzzy sets". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 17, pp.5100-5119 (2013)	ZHANG, X, DENG, Y, CHAN, FTS, XU, P, MAHADEVAN, S and HU, Y
67	"Formulation of bead width model of an SLM prototype using modified multi-gene genetic programming approach". The International Journal of Advanced Manufacturing Technology, Vol. 73, No. 1-4, pp.375-388 (2014) ISSN 0268-3768 (print), 1433-3015 (electronic) (link)	GARG, A., TAI, K. and SAVALANI, MM
68	"Grinding-aided electrochemical discharge machining of particulate reinforced metal matrix composites". INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 68, No. 9-12, pp.2349-2357 (Oct 2013) ISSN 0268-3768 (print)	LIU, J.W.#, YUE, T.M. and GUO, Z.N.
69	"Heat dissipation performance of high brightness LED package assembly using high thermal conductivity filler". APPLIED OPTICS, Vol. 52, No. 35, pp.8484-8493 (2013)	YUNG, K.C., LIEM, H.M. and CHOY, H.S.
70	"Heat transfer analysis of a high-brightness LED array on PCB under different placement configurations". INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol. 53, pp.79-86 (2014)	YUNG, K.C., LIEM, H.M. and CHOY, H.S
71	"High temperature wear characteristics of TiC composite coatings formed by laser cladding with CNT additives". Surface and Coatings Technology, Vol. 239, pp.206-211 (Jan 2014) ISSN 02578972 (print) (link)	LI, Q.H.#, SAVALANI, MM, ZHANG, Q.M. and HUO, L.
72	"Impact of information technology on the performance of logistics industry: the case of Hong Kong and Pearl Delta region". Journal of the Operational Research Society, Vol. 65, No. 6, pp.904-916 (Jun 2014) ISSN 0160-5682 (print), 1476-9360 (electronic) (link)	CHOY, King Lun, GUNASEKARAN, Angappa, LAM, Hoi Yan#, CHOW, Ka Ho, TSIM, Yick Chi, NG, Tsz Wing#, TSE, Ying Kei and LU, Xiao Ang
73	"Improvement on load performance of externally pressurized gas journal bearings by opening pressure-equalizing grooves". Tribology International, Vol. 73, pp.156-166 (May 2014) ISSN 0301679X (print) (link	DU, J.J., ZHANG, Guoqing#, LIU, T. and TO, S.
74	"In vitro degradation of porous poly(lactic acid)/quantum dots scaffolds". Composites Part B: Engineering, Vol. 55, pp.234-239 (Dec 2013) ISSN 13598368 (print) (link)	GONG, Xinghou, TANG, C.Y., PAN, Ling, HAO, Zhonghua, TSUI, C.P. and LIU, Jianing
75	"Independence of the hedging points in PHP control policy". JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY, Vol. 65, No. 5, pp.645-659 (2014)	WANG ,Z. and CHAN, F.T.S.
76	"Influence of Photolithography on the Cross-Sectional Shape of Polysiloxane as an Optical Waveguide Material on Printed Circuit Boards". JOURNAL OF ELECTRONIC MATERIALS, Vol. 42, No. 12, pp.3494-3501 (Dec 2013) ISSN 0361-5235 (print)	YUNG, KAM-CHUEN, LEE, CHUNG-PANG, WONG, CHING-HONG, TAM, SIU-LIM, PANG, SIU-KWONG and YUE, TAI-MAN
77	"Integrated product line design and supplier selection: A multi-objective optimization paradigm". Computers & Industrial Engineering, Vol. 70, pp.150-158 (Apr 2014) ISSN 03608352 (print) (link)	DENG, S.#, AYDIN, R.#, KWONG, C.K. and HUANG, Yun
78	"Integration of System-Dynamics, Aspect-Programming, and Object-Orientation in System Information Modeling". IEEE transactions on industrial informatics / a publication of the IEEE Industrial Electronics Society., Vol. 10, No. 2, pp.847-853 (May 2014) ISSN 1551-3203 (print), 1941-0050 (electronic) (link)	WANG, Junwei, LIU, Dong, IP, W.H., ZHANG, Wenjun and DETERS, Ralph
79	"Interleukin-8 gene silencing on pancreatic cancer cells using biodegradable polymer nanoplexes". Biomaterials Science, Vol. 2, No. 7, pp.1007 (Mar 2014) ISSN 2047-4830 (print), 2047-4849 (electronic) (link)	LIN, Guimiao, YANG, Chengbin, HU, Rui, CHEN, Chih-Kuang, LAW, Wing-Cheung, ANDERSON, Tommy, ZHANG, Butian, NGUYEN, Quoc Toan, TOH, Hui Ting, YOON, Ho Sup, CHENG, Chong and YONG, Ken-Tye
80	"Introduction to Graphene Electronics – A New Era of Digital Transistors and Devices". Contemporary Physics, Vol. 54, No. 5, pp.233-251 (2013)	YUNG, K.C., WU, W.M., PIERPOINT, M.P. and KUSMARTSEV, F.V.
81	"Inventory management of perishable products: A time decay linked logistic approach". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 13, pp.3864-3879 (2013)	ALI, SADIA SAMAR, MADAAN, J, CHAN, FTS and KANNAN, S
82	"Joint optimization of product family design and supplier selection under multinomial logit consumer choice rule". Concurrent Engineering, Vol. 20, No. 4, pp.335-347 (Dec 2013) ISSN 1063-293X (print), 1531-2003 (electronic) (link)	CAO, Y., LUO, X. G., KWONG, C.K., TANG, J. F. and ZHOU, W.
83	"Knowledge-based Extraction of Intellectual Capital-related Information from Unstructured Data". Expert systems with applications,Vol. 41, No. 4, pp.1315-1325 (Mar 2014) ISSN 0957-4174 (print)	TSUI, ERIC, WANG, W.M., CAI, Linlin#, CHEUNG, C.F. and LEE, W.B.
84	"Large magnetic entropy change and adiabatic temperature rise of a Gd55Al20Co20Ni5 bulk metallic glass". JOURNAL OF APPLIED PHYSICS, Vol. 115 (Jun 2014) ISSN 0021-8979 (print), 1089-7550( electronic)	XIA, L, TANG, MB, CHAN, KC and DONG, Y D
85	"Laser cladding of FeCoNiCrAlCuxSi0.5high entropy alloys on AZ31 Mg alloy substrates". MATERIALS RESEARCH INNOVATIONS, Vol. 18, pp.624-628 (May 2014) ISSN 1432-8917 (print)	YUE, T.M. and ZHANG, H.
86	"Laser cladding of HA/Ti composite coating on NiTi alloy". Surface Engineering,Vol. 29, No. 6, pp.409-431 (Jul 2013) ISSN 0267-0844 (print), 1743-2944 (electronic) (link)	YANG, S., LI, W.H. and MAN, H.C.
87	"Material Sensitivity and Formability Prediction of Warm Forming Magnesium Alloy Sheets with Experimental Verification". International Journal of Advanced Manufacturing Technology, Vol. 71, pp.253-262 (Mar 2014) ISSN 0268-3768 (print)	CHAN, LC and LU, XZ#
88	"Mechanical properties and morphology for polypropylene composites filled with microencapsulated red phosphorus: MECHANICAL PROPERTIES AND MORPHOLOGY FOR PP/MRP COMPOSITES". Polymers for Advanced Technologies, Vol. 25, No. 3, pp.347-352 (Jan 2014) ISSN 10427147 (print) (link)	LIANG, Ji-Zhao, FENG, Jin-Qing, TSUI, C.P., TANG, C.Y. and HUANG, Wen-Fei#
89	"Melt Flow Behavior in Capillary Extrusion of Nanosized Calcium Carbonate Filled PLLA/PCL Bio-Composites". Journal of Polymers and the Environment, Vol. 21, No. 3, pp.857-863 (Sep 2013) ISSN 1566-2543(print), 1572-8900 (electronic) (link)	LIANG, Ji-Zhao, ZHOU, Lin, TANG, C.Y. and TSUI, C.P.
90	"Melt Pressure Signature Tracking Using an Adaptive Kalman Filter in Microinjection Molding". Advances in Mechanical Engineering, Vol. 2013, pp.1-10 (Jul 2013) ISSN 1687-8132 (print), 1687-8140 (electronic) (link)	LIU, H, HU, Hong, YUNG, K.L., XU, YAN and ZHANG, Xing Wei
91	"Mesoplasticity approach to studies of the cutting mechanism in ultra-precision machining". Chinese Journal of Mechanical Engineering, Vol. 27, No. 2, pp.219-228 (Mar 2014) ISSN 1000-9345 (print), 2192-8258 (electronic) (link)	LEE, W.B., WANG, H., TO, S., CHEUNG, C.F. and CHAN, C.Y.
92	"Microstructure and corrosion resistance of Cu0.9NiAlCoCrFe high entropy alloy coating on AZ91D magnesium alloys by laser cladding". MATERIALS RESEARCH INNOVATIONS, Vol. 18, pp.1008-1011 (May 2014) ISSN 1432-8917 (print)	HUANG, K. J., LIN, X., WANG, Y.Y., XIE, C.S. and YUE, T.M.
93	"Microstructure and shape memory effect of acidic carbon nanotubes reinforced polyvinyl alcohol nanocomposites". Journal of Applied Polymer Science, Vol. 129, No. 3, pp.1299-1305 (Dec 2013) ISSN 00218995 (print) (link)	DU, Fei-Peng, YE, En-Zhou, TANG, C.Y., NG, Sun-Pui, ZHOU, Xing-Ping and XIE, Xiao-Lin
94	"Microstructure of Laser Re-Melted AlCoCrCuFeNi High Entropy Alloy Coatings Produced by Plasma Spraying". ENTROPY, Vol. 15, No. 7, pp.2833-2845 (Jul 2013) ISSN 1099-4300 (print)	YUE, Tai M., XIE, Hui, LIN, Xin, YANG, Haiou and MENG, Guanghui
95	"Microwave sintering and characterization of polypropylene/multi-walled carbon nanotube/hydroxyapatite composites". Composites Part B: Engineering, Vol. 56, pp.504-511 (Jan 2014) ISSN 13598368 (print)	CHEN, L.#, TANG, C.Y., KU, H.S.-L., TSUI, C.P. and CHEN, X.#
96	"Mining logistics data to assure the quality in sustainable food supply chain: a case in red wine industry". International Journal of Production Economics, Vol. 152, pp.200-209 (2014) ISSN 0925-5273 (print)	TING, S.L., TSE, Y.K., HO, G.T.S., CHUNG, SH and LAM, Hoi Yan#
97	"Modeling of epoxy dispensing process using a hybrid fuzzy regression approach". The International Journal of Advanced Manufacturing Technology, Vol. 65, No. 1-4, pp.589-600 (2013) ISSN 0268-3768 (print), 1433-3015 (electronic) (link)	CHAN, Kit Yan and KWONG, C.K.
98	"Modelling the determinants of a simulated experience in a virtual retail store and users’ product purchasing intentions". Journal of Marketing Management, Vol. 29, No. 13-14, pp.1462-1492 (Oct 2013) ISSN 0267-257X (print), 1472-1376 (electronic) (link)	PAPAGIANNIDIS, Savvas, PANTANO, Eleonora, SEE-TO, ERIC W.K. and BOURLAKIS, Michael
99	"Multi-attribute group decision-making with multi-granularity linguistic assessment information: An improved approach based on Deviation and TOPSIS". APPLIED MATHEMATICAL MODELLING, Vol. 37, No. 24, pp.10129-10140 (2013)	LIU, S, CHAN, FTS and RAN, W
100	"Multi-layer laminated Pd-based metallic glass with enhanced plasticity". MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 587, pp.240-243 (Dec 2013) ISSN 0921-5093 (print), 1873-4936 (electronic)	MA, J, CHAN, KC, XIA, L, CHEN, SH#, WU, FF, LI, WH and WANG, WH
101	"Multi-leg Seat Inventory Control Based on EMSU and Virtual Bucket". International journal of engineering business management, pp.9-13 (2014) ISSN 1847-9790 (print)	FAN, Wei, WANG, Jianwei and IP, W.H.
102	"Multi-level finite element analysis for progressive damage behavior of HA/PEEK composite porous structure". Composites Part B: Engineering, Vol. 55, pp.22-30 (Dec 2013) ISSN 13598368 (print) (link)	TANG, C.Y., TSUI, C.P., LIN, W., USKOKOVIC, P.S. and WANG, Z.W.
103	"Novel tool wear monitoring method in ultra-precision raster milling using cutting chips". Precision Engineering, Vol. 38, No. 3, pp.555-560 (2014) ISSN 01416359 (print) (link)	ZHANG, Guoqing#, TO, S. and XIAO, Gaobo#
104	"On type-2 fuzzy sets and their t-norm operations". Information Sciences, Vol. 255, pp.58-81 (Jan 2014) ISSN 00200255 (print) (link)	HU, Bao Qing and KWONG, C.K.
105	"Optimal average sample number of the SPRT chart for monitoring fraction nonconforming". European Journal of Operational Research, Vol. 229, No. 2, pp.411-421 (Sep 2013) ISSN 03772217 (print) (link)	HARIDY, Salah, WU, Zhang, LEE, CKM and BHUIYAN, Nadia
106	"Optimal due-date assignment problem with learning effect and resource-dependent processing times". Optimization Letters, Vol. 8, No. 1, pp.113-127 (Jan 2014) ISSN 1862-4472 (print), 1862-4480 (electronic) (link)	LU, Yuan-Yuan, LI, G., WU, YU-BIN and JI, P.
107	"Optimizing the synthesis of red- and near-infrared CuInS2 and AgInS2 semiconductor nanocrystals for bioimaging". The Analyst, Vol. 138, No. 20, pp.6144 (Jul 2013) ISSN 0003-2654 (print), 1364-5528 (electronic) (link)	LIU, Liwei, HU, Rui, LAW, Wing-Chueng, ROY, Indrajit, ZHU, Jing, YE, Ling, HU, Siyi, ZHANG, Xihe and YONG, Ken-Tye
108	"Parallel machines scheduling with deteriorating and learning effects". Optimization Letters, Vol. 8, No. 2, pp.493-500 (Feb 2014) ISSN 1862-4472 (print), 1862-4480 (electronic) (link)	HUANG, X, WANG, Ming-Zheng and JI, P.
109	"Prerequisites for achieving gold adsorption by multiwalled carbon nanotubes in gold recovery". Chemical Engineering Science, Vol. 107, pp.58-65 (Apr 2014) ISSN 00092509 (print) (link) (7 Apr 2014)	PANG, SK and YUNG, K.C.
110	"Priority-Based Distributed Manufacturing Process Modeling via Hierarchical Timed Color Petri Net". IEEE transactions on industrial informatics / a publication of the IEEE Industrial Electronics Society., Vol. 9, No. 4, pp.1836-1846 (Nov 2013) ISSN 1551-3203 (print), 1941-0050 (electronic) (link)	LV, Y. Q., LEE, CKM, WU, Z., CHAN, H. K. and IP, W.H.
111	"Priority-based scheduling in flexible system using AIS with FLC Approach". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 51, No. 16, pp.4880-4895 (2013)	CHAN, FTS, PRAKASH, A and MISHRA, N
112	"Proactive and reactive purchasing planning under dependent demand, price, and yield risks". OR Spectrum, pp.1-22 (Aug 2013) ISSN 0171-6468 (print), 1436-6304 (electronic) (link)	HONG, Zhen, LEE, CKM and NIE, Xiaofeng
113	"Product form design using customer perception evaluation by a combined superellipse fitting and ANN approach". Advanced Engineering Informatics, Vol. 27, No. 3, pp.386-394 (Aug 2013) ISSN 14740346 (print) (link)	TANG, C.Y., FUNG, K.Y.#, LEE, Eric W.M., HO, G.T.S., SIU, Kin W.M. and MOU, W. L.
114	"Prognostics of Chromaticity State for Phosphor-converted White Light Emitting Diodes Using an Unscented Kalman Filter Approach". IEEE Transactions on Device and Materials Reliability, Vol. 14, No. 1, pp.564-573 (2014)	FAN, JIAJIE#, YUNG, KAM CHUEN and PECHT, MICHAEL
115	"Prognostics of Lumen Maintenance for High Power White Light Emitting Diodes Using a Nonlinear Filter-based Approach". RELIABILITY ENGINEERING AND SYSTEM SAFETY, Vol. 123, pp.63-72 (2014)	FAN, J.J.#, YUNG,K.C. and PECHT, MICHAEL
116	"Pronounced energy absorption capacity of cellular bulk metallic glasses". APPLIED PHYSICS LETTERS, Vol. 104 (Mar 2014) ISSN 0003-6951 (print), 1077-3118 (electronic)	S.H., Chen#, CHAN, KC, WU, FF and XIA, L
117	"Reduction of environmentally induced cracking of laser-welded shape memory NiTi wires via post-weld heat-treatment". Materials Science and Engineering: A, Vol. 588, pp.388-394 (Dec 2013) ISSN 09215093 (print) (link) (20 Dec 2013)	CHAN, C.W. and MAN, H.C.
118	"Research on Multi-leg Inventory Control Based on Passenger Choice". International journal of engineering business management, Vol. 6, No. 2, pp.3-8 (2014) ISSN 1847-9790 (print)	FAN, Wei, QIUBO, Su and IP, W.H.
119	"Robust production control policy for a multiple machines and multiple product-types manufacturing system with inventory inaccuracy". International Journal of Production Research, Vol. 52, No. 16, pp.4803-4819 (2014) ISSN 0020-7543 (print), 1366-588X (electronic) (link)	CHAN, FTS and WANG, Zheng
120	"Several flow shop scheduling problems with truncated position-based learning effect". Computers & Operations Research, Vol. 40, No. 12, pp.2906-2929 (Dec 2013) ISSN 03050548 (print) (link)	WANG, Xiao-Yuan, ZHOU, Zhili, ZHANG, Xi, JI, P. and WANG, JI-BO
121	"Shear avalanches in metallic glasses under nanoindentation: Deformation units and rate dependent strain burst cut-off". APPLIED PHYSICS LETTERS, Vol. 103 (Sep 2013) ISSN 0003-6951(print), 1077-3118 (electronic)	BIAN, XL, WANG, G, CHAN, KC, REN, JL, GAO, YL and ZHAI, QJ
122	"Simulation of cross-border competition of free internet content providers". COMPUTERS IN INDUSTRY, Vol. 64, No. 6, pp.754-764 (2013)	LI, J, CHAN, FTS and CHONG, AYL
123	"Single machine scheduling jobs with a truncated sum-of-processing-times-based learning effect". The International Journal of Advanced Manufacturing Technology, Vol. 67, No. 1-4, pp.261-267 (Jul 2013) ISSN 0268-3768 (print), 1433-3015 (electronic) (link)	LI, Lin, YANG, Sheng-Wu, WU, YU-BIN, HUO, Yunzhang and JI, P.
124	"Single machine scheduling with general time-dependent deterioration, position-dependent learning and past-sequence-dependent setup times". Optimization Letters, Vol. 7, No. 8, pp.1793-1804 (Dec 2013) ISSN 1862-4472 (print), 1862-4480 (electronic)	HUANG, X, LI, G., HUO, Yunzhang and JI, P.
125	"Single machine scheduling with truncated job-dependent learning effect". Optimization Letters, Vol. 8, No. 2, pp.669-677 (Feb 2014) ISSN 1862-4472 (print), 1862-4480 (electronic) (link)	WANG, Xue-Ru, WANG, JI-BO, JIN, Jian and JI, P.
126	"Single-machine group scheduling with deteriorating jobs and allotted resource". Optimization Letters, Vol. 8, No. 2, pp.591-605 (Feb 2014) ISSN 1862-4472 (print), 1862-4480 (electronic) (link)	WANG, Dan, HUO, Yunzhang and JI, P.
127	"Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates". Journal of alloys and compounds, Vol. 587, pp.588-593 (Feb 2014) ISSN 0925-8388 (print)	YUE, T.M., XIE, H., LIN, X., YANG, H.O. and MENG, G.H.
128	"Stabilized shear banding of ZrCu-based metallic glass composites under tensile loading". JOURNAL OF MATERIALS SCIENCE, Vol. 49, pp.2164-2170 (Mar 2014) ISSN 0022-2461 (print), 1573-4803 (electronic)	WU, FF, CHAN, KC, LI, ST and WANG, G
129	"State-of-the-art in empirical modelling of rapid prototyping processes". Rapid Prototyping Journal, Vol. 20, No. 2, pp.164-178 (Feb 2014) ISSN 1355-2546 (print) (link)	GARG, A., TAI, K. and SAVALANI, MM
130	"Strategic procurement from forward contract and spot market". Industrial Management & Data Systems, Vol. 114, No. 5, pp.778-796 (Jun 2014) ISSN 0263-5577 (print) (link, pp.778-796)	LEE, CKM, LIN, Danping and PASARI, Rohan
131	"Study of microstructure evolution in novel Sn–Zn/Cu bi-layer and Cu/Sn–Zn/Cu sandwich structures with nanoscale thickness for 3D packaging interconnection". Microelectronic Engineering, Vol. 122, pp.52-58 (Jun 2014) ISSN 01679317 (print) (link)	LI, Qingqian, CHAN, Y.C., ZHANG, Kaili and YUNG, K.C.
132	"Study of the workspace of a class of universal joints". Mechanism and Machine Theory, Vol. 73, pp.244-258 (Mar 2014) ISSN 0094114X(print) (link)	ZHANG, Guoqing#, DU, J.J. and TO, S.
133	"Supplier pre-selection for platform-based products: a multi-objective approach". International Journal of Production Research, Vol. 52, No. 1, pp.1-19 (2013) ISSN 0020-7543 (print), 1366-588X (electronic) (link)	CAO, Yan, LUO, X.G., KWONG, C.K. and TANG, Jiafu
134	"Supplier selection with an AHP approach based on Bayes classification algorithm". Transportation Economics and Logistics Review, Vol. 4, pp.85-108 (2013)	CHAN, FTS, CHUNG, SH and CHOW, JCL
135	"Survey of Green Vehicle Routing Problem: Past and future trends". Expert Systems with Applications, Vol. 41, No. 4, pp.1118-1138 (Mar 2014) ISSN 09574174 (print) (link)	LIN, Canhong#, CHOY, K.L., HO, G.T.S., CHUNG, SH and LAM, H.Y.#
136	"Temperature dependent dynamics transition of intermittent plastic flow in a metallic glass. I. Experimental investigations". JOURNAL OF APPLIED PHYSICS, Vol. 114 (Jul 2013) ISSN 0021-8979 (print)	LIU, ZY, WANG, G, CHAN, KC, REN, JL, HUANG ,YJ, BIAN, XL, XU, XH, ZHANG, DS, GAO, YL and ZHAI , QJ
137	"Temperature dependent dynamics transition of intermittent plastic flow in a metallic glass. II. Dynamics analysis". JOURNAL OF APPLIED PHYSICS, Vol. 114 (Jul 2013) ISSN 0021-8979 (print)	LIU, ZY, WANG, G, CHAN, KC, REN , JL, HUANG, YJ, BIAN,XL, XU, XH, ZHANG ,DS, GAO,Y L and ZHAI,Q J
138	"Tensile deformation of a Ti-based metallic glass composite lamella confined by commercially pure titanium". PHILOSOPHICAL MAGAZINE LETTERS, Vol. 94, pp.233-241 (Apr 2014) ISSN 0950-0839 (print), 1362-3036 (electronic)	WU, FF, CHAN, KC, LI, ST, WANG,G and LI,P
139	"Tensile properties of polycaprolactone/nano-CaCO3 composites". Journal of Polymer Engineering, Vol. 34, No. 1, pp.69-73 (Jan 2014) ISSN 0334-644 7 (print), 2191-0340 (electronic) (link)	LIANG, Ji-Zhao, DUAN, De-Rong, TANG, C.Y., TSUI, C.P., CHEN, Da-Zhu and ZHANG, Shui-Dong
140	"The effect of responsiveness of the control-decision system to the performance of FMS". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 72, pp.32-42 (2014)	CHAN, F.T.S., BHAGWAT, R. and CHAN, H.K.
141	"The effects of functionalization on the thermal and tribo-mechanical behaviors of neat and grafted polyethylene nanocomposites". Polymer Composites, pp.1710-1719 (Jul 2013) ISSN 02728397 (print)	STOJANOVIĆ, D.B., ORLOVIĆ, A., ZRILIĆ, M., BALAĆ, I., TANG, C.Y., USKOKOVIĆ, P.S. and ALEKSIĆ, R.
142	"The moderating role of income on consumers’ preferences and usage for online and offline payment methods". Electronic Commerce Research, Vol. 14, No. 2, pp.189-213 (Feb 2014) ISSN 1389-5753 (print), 1572-9362 (electronic) (link)	SEE-TO, ERIC W.K., PAPAGIANNIDIS, Savvas and WESTLAND, J. Christopher
143	"The relation between chip morphology and tool wear in ultra-precision raster milling". International Journal of Machine Tools and Manufacture, Vol. 80-81, pp.11-17 (May 2014) ISSN 08906955 (print) (link)	ZHANG, Guoqing#, TO, S. and XIAO, Gaobo#
144	"Theoretical and Experimental Analysis of the Effect of Error Motions on Surface Generation in Fast Tool Servo Machining". Precision engineering, Vol. 38, No. 2, pp.428-438 (Apr 2014) ISSN 0141-6359 (print)	KONG, L.B., CHEUNG, C.F. and KWOK, T.C.#
145	"Thermal investigation of a high brightness LED array package assembly for various placement algorithms". APPLIED THERMAL ENGINEERING, Vol. 63, No. 1, pp.105-118 (2014)	YUNG, K.C., LIEM, H.M. and CHOY, H.S.
146	"Unrelated parallel-machine scheduling with deteriorating maintenance activities to minimize the total completion time". Optimization Letters, Vol. 8, No. 1, pp.129-134 (Jan 2014) ISSN 1862-4472( print), 1862-4480 (electronic) (link)	WANG, Li-Yan, HUANG, X, JI, P. and FENG, En-Min
147	"Using social network analysis to combat counterfeiting". International Journal of Production Research (Nov 2013) ISSN 0020-7543 (print), 1366-588X (electronic) (link, pp.1-14) (on-line publication)	TING, S.L.# and TSANG, ALBERT H.C.
148	"Value co-creation and purchase intention in social network sites: The role of electronic Word-of-Mouth and trust – A theoretical analysis". Computers in Human Behavior, Vol. 31, pp.182-189 (Feb 2014) ISSN 07475632 (print) (link)	SEE-TO, ERIC W.K. and HO, Kevin K.W.
149	"Voxel-based approach to generate entire human metacarpal bone with microscopic architecture for finite element analysis". Bio-Medical Materials and Engineering, Vol. 24, No. 2, pp.1469-1484 (Mar 2014) ISSN 0959-2989 (print), 1878-3619 (electronic)	TANG, C.Y., TSUI, C.P., TANG, YM, WEI, L., WONG, C.T., LAM, K.W., IP, W.Y., LU, W.W.J. and PANG, MYC
150	"Why does pitting preferentially occur on shear bands in bulk metallic glasses?". INTERMETALLICS, Vol. 42, pp.107-111 (Nov 2013) ISSN 0966-9795 (print)	WANG, YM, ZHANG, C, LIU, Y, CHAN, KC and LIU, L

Publication in policy or professional journal

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
151	"A Feasibility Study on Microwave Sintering of Heat Sinks". Annunal Journal of Institue of Industrial Engineers (Hong Kong), Vol. 33, pp.23-28 (Sep 2013) ISSN 1609-3208 (print)	CHOY, M.T.# and TANG, C.Y.
152	"Molecular Dynamics Simulation of the Effect of Nano Defect on the Wear of Diamond Tools in Ultraprecision Machining". Annunal Journal of Institute of Industrial Engineers (Hong Kong), Vol. 33, pp.42-51 (Sep 2013) ISSN 1609-3208 (print)	FUNG, K.Y.#, TANG, C.Y. and CHEUNG, C.F.

Invited conference paper

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
153	"Novel Biosensing Technique based on Plasmonic Semiconductor Nanocrystals". 3rd Annual World Congress of Advanced Materials 2014, Chongqing, China, 6-8 June 2014, pp.116 (Jun 2014)	LAW, Wing Cheung, LIU, Xin, GUO, Moran, NG, Chi Ho, SWIHART, Mark and PRASAD, Paras
154	"RFID IN MINING INDUSTRY: CURRENT APPLICATIONS AND FUTURE RESEARCH DIRECTIONS". In Coetzee, Jasper, Ed., World Trends in Maintenance Engineering Conference, Pretoria, South Africa, 13 – 15 August 2013, M-Tech, Pretoria, South Africa, pp.1-9 (Aug 2013)	TSANG, ALBERT H.C. and TING, S.L.
155	"Enhancing Knowledge Quality via a Semantic-oriented Framework for a Social Knowledge Cloud". Proceedings of the IEEE International Conference on Software Engineering and Service Science, Beijing, China, 27-29th June 2014, pp.153-156 (Jun 2014)	SABETZADEH, F#, TSUI, E and LEE, W.B.
156	"Knowledge Management and Intellectual Capital Research in Hong Kong". The Japan Intellectual Capital Management Journal, Tokyo, Japan, 2014, pp.9-18 (Mar 2014)	LEE, W.B. and CHAN, Bo-ling Jenny

Refereed conference paper

Academic research: refereed

Serial No.	Title/Brief Description	Author(s)
157	"A Critical Analysis of Intellectual Capital Reports in Banking Industry from 1994 to 2011". Proceedings of the International Conference on Intellectual Capital and Knowledge Management, Washington DC, USA, 24-25th October 2014, pp.667-673 (Oct 2013)	CAI, L#, TSUI, E and CHEUNG, C.F.
158	"An Exploratory Study on an Intellectual Capital (IC) eco-system". Proceedings of the International Forum on Knowledge Asset Dynamics (IFAD), Matera, Italy, 11-13th June 2014, pp.2952-2966 (Jun 2014)	CAI, L#, TSUI, E and CHEUNG, C.F.
159	"Assessment of Uncertainty in Quality of Knowledge in the Research Publication Review Process". Proceedings of the 10th IEEE International Conference on Fuzzy Systems and Knowledge Discovery (FSKD 2013), Shenyang China, 23-25th July 2013, pp.946-950 (Jul 2013)	SABETZADEH, f#, TSUI, E and CHEUNG, C.F.
160	"Effective Asset Management For Hospitals with RFID". IEEE International Technology Management Conference, Chicago, 12-15 Jun 2014 (Jun 2014) (link) (USB format)	LEE, CKM and PALANIAPPAN, Sathishwaran S/O
161	"The adoption of a Personal Learning Environment & Network (PLE&N) to support learning". Proceedings of the Asian Conference on Society, Education and Technology (ACSTE 2013), Osaka, Japan, 23-27th October, 2013, pp.46-55 (Oct 2013)	TSUI, M#, TSUI, E and SEE-TO, E W.K.
162	"A Model for Measuring Quality of Experience (QoE) in Mobile Application – An Exploratory Approach". Asian Network for Quality Congress 2013, Bangkok, Thailand, 14 –18 October 2013, Asian Network for Quality, Bangkok, Thailand, pp.1-7 (Oct 2013)	HU, Daniel Yijiu#, CHEN, Cheryl Na# and TSANG, ALBERT H.C.
163	"Project Context and its Effect on Individual Competencies and Project Team Performance". International Conference on Intellectual Capital, Knowledge Management and Organisational Learning (ICICKM2013), Washington DC, USA, 24-25th October, 2013, pp.602-611 (Oct 2013)	ROZHKOV, M.#, CHEUNG, C.F. and TSUI, E
164	"A Capacitive Micromachined Ultrasonic Transducer (CMUT) Array with Nickel Membranes in A Convex Shape". 2014 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Honolulu, Hawaii, USA, 13-16 April 2014, pp.596-599 (Apr 2014)	CHONG, Po Fat#, SHI, XIAOMEI and CHENG, CHING-HSIANG
165	"A Capacitive Micromachined Ultrasonic Transducer (CMUT) Array with Single Layer Graphene Membrane". Proceedings of the 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2014),Daegu, Korea, 29 June - 2 July 2014 (Jun 2014) (Index no. P2-86)	CHONG, Po Fat#, SHI, XIAOMEI and CHENG, CHING-HSIANG
166	"A Computer Simulation Method for Mold Optimization of Rotational Molded Objects". International Conference on Machine Learning, Electrical and Mechanical Engineering (ICMLEME'2014) Jan. 8-9, 2014 Dubai (UAE), Dubai, Jan. 8-9, 2014, International Institute of Engineers, pp.33-36 (May 2014) ISBN 9789382242635 (print) (link)	NG, Wai-On#, CHAN, CY, YUNG, K.L., CHEN, HUIYING and LAM, CW
167	"A GA-AIS approach to multi-mold production scheduling". International Conference on Technology Innovation and Industrial Management (TIIM), Seoul, South Korea, May 27-30, 2014, pp.51-60 (May 2014)	WONG, C.S.#, CHAN, FTS and CHUNG, SH
168	"A Hybrid Decision Support System for Storeage Location Assignment in the Fast-Fashion Industry". Proceedings of PICMET '13: Technology Management for Emerging Technologies, San Jose, USA, 28 July – 1 August 2013, pp.486-473 (Aug 2013)	CHOY, K.L., LAM, h.y.#, LIN, CANHONG# and LEE, c.k.h.#
169	"A Study of Chip Formation in Nanoscale Ductile-Regime Cutting of Silicon Carbide by Molecular Dynamics". Proceedings of 5th international conference of Asian society for precision engineering and nanotechnology, Taiwan, 12-15 Nov 2013 (Nov 2013) (Paper ID: 1249, CD Version)	XIAO, G.B.#, TO, S. and ZHANG, G.Q.#
170	"A Study of Chip Morphology in Diamond Cutting of Electropulsing Treated AZ91 Alloy with Finite Element Modelling". Proceedings of 5th international conference of Asian society for precision engineering and nanotechnology, Taiwan, 12-15 Nov 2013 (Nov 2013) (Paper ID:1072, CD Version)	WANG, H. and TO ,S.
171	"A Study of Modlelling and Simulation of Single-Point Diamond Turning of Micro-structured Patterns on Precision Rollers". Proceedings of American Society for Precision E435ngineering’s 28th Annual Meeting (ASPE2013), St. Paul, Minnesota, USA, October 20- October 25, American Socoiety for Precision Engineering, pp.532-535 (Oct 2013)	CHEUNG,C .F., REN, M.J., XIAO, G.B.#, MAK, C.H.#, KONG, L.B. and TO, S.
172	"A Study of Process Chain Modelling and Analysis for Computer Controlled Ultra-precision Polishing of Structured Freeform Surfaces". Proceedings of ASPE/ASPEN Summer Topical Meeting Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces, Kohala Coast, Hawaii, USA, June 26-June 27, American Society for Precision Engineering, pp.42-47 (Jun 2014)	CHEUNG, C.F., KONG, L.B. and HO, L.T.
173	"A Study of Real-time Spindle Error Compensation in Single-Point Diamond Turning of Optical Micro-structured Patterns on Precision Rollers". Proceedings of ASPE/ASPEN Summer Topical Meeting Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces, Kohala Coast, Hawaii, USA, June 26-June 27, American Society for Precision Engineering, pp.78-82 (Jun 2014)	LI, Mingyu#, CHEUNG, C.F., REN, M.J., KONG, L.B., LEE, W.B., CHENG,CHING-HSIANG and CHEN,Xing
174	"A data mining and optimization-based real-time mobile intelligent routing system for city logistics". 2013 IEEE 8th International Conference on Industrial and Information Systems, ICIIS 2013, Sri Lanka, Aug. 18-20, 2013, pp.156-161 (Aug 2013)	LIN, canhong#, CHOY, king-lun, PANG, grantham and NG, michelle t. w.#
175	"A robust production control policy for a multiple-stage production system with inventory inaccuracy and time-delay". The 9th IEEE International Conference on Automation Science and Engineering, Madison,Wisconsin, USA., August 17-21, 2013 (2013) (CD format)	WANG, Z and CHAN, FTS
176	"An Investigation on the Effect of Tool Path Generation on Surface Finish in Ultra-precision Milling". Proceedings of 5th international conference of Asian society for precision engineering and nanotechnology, Taiwan, 12-15 Nov 2013 (Nov 2013) (Paper ID: 1048, CD Version)	WANG, S.J., TO, S., CHEN, X., CHEN, X.D. and WANG, H.
177	"An RFID-Enabled Wireless Sensor Network (WSN) Monitoring System for Biological and Pharmaceutical Products". 2014 International Symposium on Computer, Consumer and Control, Taichung, Taiwan, June 10, 2014-June 12, 2014, IEEE, pp.757-760 (Jun 2014) ISBN 978-1-4799-5277-9 (electronic) (link)	NG, C.K.#, WU, C.H., WANG, Lixing#, IP, W.H. and ZHANG, J.
178	"An integration of AHP approach and Bayes Classification algorithm in supplier selection". The IEEE International Conference on Industrial Engineering and Engineering Management, Bangkok, Thailand, 10-13 December 2013 (2013) (CD format)	CHAN, FTS, CHUNG, SH and CHOW, JCL
179	"An optimal strategy for yard trucks management in Hong Kong container terminals". The 2013 International Symposium on Marketing, Logistics, and Business (MLB), Nagoya, Japan, 24-26 Sept 2013, pp.123-134 (2013)	WANG, ZX#, CHAN, FTS, CHUNG, SH and NIU, B
180	"An optimization approach to integrated aircraft and passenger recovery". The Institute of Industrial Engineers Asian Conference 2013 (IIE Asian 2013 Conference), Taipei, Taiwan, 18-20 July 2013, pp.729-737 (2013)	CHAN, FTS, CHUNG, SH, CHOW, JCL and WONG, CS
181	"Capacitive Micromachined Ultrasonic Transducers Based on Graphene Materials". Proceedings of the 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2014), Daegu, Korea, 29 June - 2 July 2014 (Jun 2014) (Index no. 6-5)	SHI, XIAOMEI, CHONG, Po Fat# and CHENG, CHING-HSIANG
182	"Closed-loop supply chain network optimization for Hong Kong Cartridge recycling industry". The 2013 International Symposium on Marketing, Logistics, and Business (MLB), Nagoya, Japan, 24-26 Sept 2013, pp.107-122 (2013)	CHEN, YT#, CHAN, FTS, CHUNG, SH and NIU, B
183	"Conceptual framework for building sustainable supply chains in multinational corporations by incorporating corporate social responsibility". International Conference on Industrial, Mechanical and Manufacturing Engineering (ICIMME'14), Pattaya, Thailand., 23-24 June 2014, pp.50-56 (Jun 2014)	CHAN, FTS
184	"Corrosion and Hydrogen Evolution Improvement of Biodegradable Mg-based Alloy for Orthopedic and Implant Applications". 2nd International Conference on BioTribology, Toronto, Canada, 11-14 May 2014 (May 2014) (Online publication)	CHAN, LC, LAI, CP, WONG, SS and IP, WY
185	"Cutting Force Evolution and Its Power Spectrum Analysis with Tool Wear in Ultra-precision Raster Milling". Proceedings of 5th international conference of Asian society for precision engineering and nanotechnology, Taiwan, 12-15 Nov 2013 (Nov 2013) (Paper ID: 1264, CD Version)	ZHANG, G.Q.#, TO, S. and XIAO, G.B.#
186	"Design of Micromachined Condenser Microphone with Concave Backplate and Comparison with Flat Backplate Microphone".2014 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Honolulu, Hawaii, USA, 13-16 April 2014 (Apr 2014)	SHI, XIAOMEIandCHENG, CHING-HSIANG
187	"Design of ultra-precision lathe for machining roller drum used for the forming of LED light guide plate". Proceedings of 5th international conference of Asian society for precision engineering and nanotechnology, Taiwan, 12-15 Nov 2013 (Nov 2013) (Paper ID: 1310, CD Version)	DU, J.J., CHEN, D.K., LEE, W.B., CHEN, X., CHEUNG, C.F., TO, S., KONG, L.B., CHEN, X.D., LIU, Q., LI, K.T. and WANG, S.J.
188	"Diamond tool wear detection method using cutting force and its power spectrum analysis in ultra-precision fly cutting". In Li, Yang, Eric, Ruch and Shengyi, Li, Eds., SPIE Proceedings, The 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies, Harbin, China, 26-29 April 2014, SPIE-Intl Soc Optical Eng, pp.928105 (2014) (link)	ZHANG, G. Q.# and TO, S.
189	"Fabrication of POLY(L-Lactide) Microparticles by Ultrasonic Atomization". In David Hui, Ed., Twenty First Annual International Conference on Composites/Nano Engineering, Tenerife, Canary Islands, Spain, 21-27 July 2013, pp.329-320 (Jul 2013)	HUANG, Wenfei#, TSUI, C.P. and TANG, C.Y.
190	"Fun in a Trustworthy Environment? The Effects of Message Source Credibility and Message Appeal on EWOM Responses in Facebook". 19th UKAIS Conference on Information Systems, 2014, Oxford, UK, 7th-9th April 2014 (2014) (Online publication)	YIU , Chi Yan, LI, Honglei and SEE-TO, ERIC W.K.
191	"How to Improve Performance in Technology and Innovation Teams?". Proceedings of the international research conference on engineering, science and management 2014, Dubai, 4-5th June 2014, pp.126-130 (Jun 2014)	ROZHKOV, Mikhail#, CHEUNG, C.F. and TSUI, E
192	"Integrated hedging-point-based production/inventory control and dynamic lot sizing problem under stochastic demand". International Conference on Engineering and Applied Sciences Optimization (OPTI 2014), Kos Island, Greece, 4-6 June 2014 (Jun 2014) (CD format)	LI, N.#, CHAN, FTS and CHUNG, SH
193	"Integrated scheduling of multi-factory supply chain with shipping information". International Conference on Technology Innovation and Industrial Management (TIIM), May 27-30, 2014, pp.161-170 (May 2014)	SUN, X.#, CHUNG, SH and CHAN, FTS
194	"Methods and Algorithms of Data Stitching and Fusion for Multi-scale Measurement of Ultra-precision Freeform Surfaces". Proceedings of ASPE/ASPEN Summer Topical Meeting Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces, Kohala Coast, Hawaii, USA, June 26-June 27, American Society for Precision Engineering, pp.22-27 (Jun 2014)	KONG, L.B., CHEUNG, C.F. ,REN, M.J., LEE, W.B. and TO, S.
195	"Minimizing port staying time for container terminal with position based handling time". The IEEE International Conference on Industrial Engineering and Engineering Management, Bangkok, Thailand, 10-13 December 2013 (Dec 2013) (CD format)	MA, HL#, CHAN, FTS, CHUNG, SH and NIU, B
196	"Minimizing setup time from mold-lifting crane in mold maintenance schedule". The Institute of Industrial Engineers Asian Conference 2013 (IIE Asian 2013 Conference), Taipei, Taiwan, 18-20 July 2013, pp.739-747 (2013)	WONG, CS, CHAN, FTS, CHUNG, SH and NIU, B
197	"Optimization of Facility Location Problem in Reverse Logistics Network using Artificial Bee Colony Algorithm". 2013 IEEE International Conference on Industrial Engineering and Engineering Management, Bangkok, 10-13 Dec 2013 (Dec 2013)	ZHANG, Shuzhu# and LEE, CKM
198	"Particle filter for targets tracking with motion model". 2013 IEEE 8th International Conference on Industrial and Information Systems, ICIIS 2013, Sri Lanka, Aug. 18-20, 2013, pp.128-132 (Aug 2013)	PANG, grantham k.h. and CHOY, K.L.
199	"Particle swarm optimization algorithm for the truck scheduling in container terminals". Proceedings of The 2014 International Conference on Information Science, Electronics and Electrical Engineering (ISEEE 2014), Sapporo City, Hokkaido, Japan, April 26-28, 2014, pp.1392-1396 (2014)	NIU, B, XIE, T, CHAN, FTS, TAN, LJ and WANG, ZX#
200	"Research on Measurement and Form Characterization of Ultra-precision Freeform Surfaces". Proceedings of the 15th International Manufacturing Conference in China (IMCC2013), Nanjing, China, October 16 – October 18, Nanjing University of Aeronautics and Astronautics (Oct 2013) (Electronic version)	CHEUNG, C.F., KONG, L.B., REN, M.J., LEE, W.B. and TO, S.
201	"Social Network Site Fan Page as a Communication Channel". The 44th annuaI convention of the Communication Associaition of Japan (CAJ), Okinawa, Japan, 21 - 22 June 2014, pp.21 (2014)	SEE-TO, ERIC W.K., HO, Kevin K.W. and CHOW, Sophia W.S.
202	"Studying Learning Performance Using a M-Learning Approach". 2014 The Fourth National Conference Web Intelligence and Applications, Penghu, Taiwan, 2-3 May, 2014, Taiwan Association for Web Intelligence Consortium (2014) ISBN 978-986-87216-2-3(print) (CD format)	WU, C.H. , HO, G.T.S., TSENG, K.K., IP, W.H. and MOU, W. L.
203	"Surface coating of poly-D-L-lactide/nano-hydroxyapatite composite scaffolds for dexamethasone-releasing function and wettability enhancement". In Bose, Susmita; Bandyopadhyay, Amit; Narayan Roger, Ed., Ceramic Transactions: Biomaterials Science: Processing, Properties, Applications III, Vol. 242, United States, 27-31 October 2012, pp.29-36 (2013)	CHEN, L.#, TANG, C.Y., KU, H.S.-L., CHEN, D.Z. and TSUI, C.P.
204	"Tool wear characteristics and their effects on freeform surface quality in ultra-precision raster milling". ASPE/ASPEN Summer Topical Meeting-Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces, Hawaii, US, 26-27 Jun 2014, pp.112-115 (Jun 2014)	TO, S. and ZHANG, G.Q.#
205	"Yard truck configurations for efficient operation of container terminals in Hong Kong". Proceedings of The 2014 International Conference on Information Science, Electronics and Electrical Engineering (ISEEE 2014),Sapporo City, Hokkaido, Japan, April 26-28, 2014, pp.1435-1439 (2014)	WANG, ZX#, CHAN, FTS, CHUNG, SH and NIU, B
206	"Zinc's role in Mg-Zn-Mn Alloys for Orthopedic Applications". 2014 Annual Meeting of the Society for Biomaterials, Denver, CO, USA, 16-19 Apr 2014 (Apr 2014) (Online publication)	WONG, SS, LAI, CP, IP, WY and CHAN, LC

Consulting or contract research report

Contract Research

Serial No.	Title/Brief Description	Author(s)
207	"A STUDY ON ASSET LIVES FOR HONG KONG INTERNATIONAL AIRPORT". PolyU Technology & Consultancy Co., Ltd., Hong Kong, (Jun 2014) (The client is Airport Authority Hong Kong)	TSANG, ALBERT H.C.
208	"Carbon Footprint analysis and thermal study of Neocoat thermal paint". 37pp (2014) (Greendot International Limited, PTec No: P13-0479)	YUNG, K.C.
209	"Design and Ultra-precision machining of a mould insert for fresnel optics for infra-detector". 3pp (2014) (Design report for Today Industrial Company, Ptec ref. no. P13-0320)	TO, S. and 王,文奎
210	"Design and fabrication of optical components for HUD systems". 6pp (2013) (Design report for Shenzhen Sivision Technology Co.,Ltd., Ptec ref. no. P13-0177)	TO, S. and 王,文奎
211	"Development of optical fresnel lenses for Mini Sketcher Projector". 13pp (2013) (Design report for Hallmark Cards (HK) Ltd Ptec ref. no. P12-0494)	TO, S. and 王,文奎
212	"Development of optical lenses for an infra telescope". 3pp (2013) (Design report for Hung Wai Products Ltd., Ptec ref. no. P12-0263)	TO, S.
213	"KM strategy report for Nikyang". 38pp (2014) (Ptech ref. no. : P13-0268)	SY, NICOLE, TSUI, ERIC and LAU, Irene

Film, video

Other Outputs

Serial No.	Title/Brief Description	Author(s)
214	"Video for entperprise computing". 10-20 Jul (Aug 2013)	LEE, CKM.

Patents granted

Other Outputs

Serial No.	Title/Brief Description	Author(s)
215	"Flexible Capacitive Micromachined Ultrasonic Transducer Array with Increased Effective Capacitance". US - US8,531,919B2 (Sep 2013)	CHENG, CHING-HSIANG and CHAO, CHEN
216	"Isothermal Forming System for Production of Sheet Metal Parts". US - US8,596,106B2 (Dec 2013)	TANG, chak yin, LEE, tai chiu, CHAN, Luen chow and NG, nga yung
217	"具有增加的有效電容的柔性電容式微加工超聲換能器陣列". PRC - ZL201080041013.3 (Nov 2013)	鄭,慶祥 and 鈔,晨
218	"磨削輔助電化學放電加工工具及方法". PRC - ZL201010284957.5 (Mar 2014)	余,大民 and 劉,江文#

Journal editor

Other Outputs

Serial No.	Title/Brief Description	Author(s)
219	Associate Editor. Annual Journal of Institute of Industrial Engineers (Hong Kong), Institute of Industrial Engineers (Hong Kong), Hong Kong (Sep 2013) (ISSN:1608-3208)	TSUI, C.P.
220	Associate Editor. International Journal of Engineering Business Management(Jul 2013)	LEE, CKM
221	Associate Editor. International Journal of Manufacturing Technology and Management (2013) (2013-14)	YUNG, K.C.
222	Associate Editor. International Journal of Modelling in Operations Management (2013) (2013-14)	CHAN, FTS
223	Associate Editor. International Journal of Network and Mobile Technologies (2013) (2013-14)	CHAN, FTS
224	Editor. Annual Journal of Institute of Industrial Engineers (Hong Kong), Institute of Industrial Engineers (Hong Kong), Hong Kong (Sep 2013) (ISSN:1608-3208)	TANG, C.Y.
225	Editor. HKIE Transactions (2013) (2013-14, Editor-in-Chief)	CHAN, KC
226	Editor. Industrial Engineering Research (An International Journal of IE Theory and Applications), Institute of Industrial Engineers (Hong Kong), Hong Kong (2013)	TANG, C.Y.
227	Editor. International Journal of Engineering Business Management, InTech (2014)	IP, W.H.
228	Editor. International Journal of Knowledge and Systems Science (Jul 2013)	LEE, W.B.
229	Editor. International Journal of Systems Science Special Issue: Computational and systematic approaches in enhancing supply chain performance, Vol. 45, No. 6, Taylor & Francis Group, pp.1253-1254 (Jan 2014)	CHOY, K.L., HO, G.T.S. and KOH, Lenny
230	Editor. Journal of Quality in Maintenance Engineering, Vol. 19 to 20, No. Vol. 19, 2 & 3; Vol. 20, 1 & 2, Emerald Group Publishing Limited (Jul 2013) (The Associate Editorship runs from July 2013 to June 2014)	TSANG, ALBERT H.C.
231	Editor. Lead Guest Editor of Journal of Nanomaterials Special Issue: Engineering Nanomaterials for Theranostics Applications, Hindawi Publishing Corporation (May 2014)	LAW, Wing Cheung
232	Editor. Surface and Coatings Technology (2013) (up to 2015)	MAN, H.C.
233	Editor. The Open Economics and Management Journal (2013) (Section Editor, 2013-14)	CHAN, FTS
235	Editor. VINE, The Information and Knowledge Management Systems (Jul 2013)	LEE, W.B

Other outputs

Other Outputs

Serial No.	Title/Brief Description	Author(s)
235	"三維打印技術在整形醫學中的應用". The Hong Kong Metals Manufacturers Association, Hong Kong (Mar 2014) (link, pp.18-19)	TANG, C.Y., CHOY, Man Tik#, CHEN, Ling and FUNG, Kai Yin#
236	"快速微波金屬粉末燒結成型技術". The Hong Kong Metals Manufacturers Association, Hong Kong (Sep 2013) (link, pp.24-25)	TANG, C.Y. and CHOY, Man Tik#
237	"泡沫鋁的性能與其散熱應用". The Hong Kong Metals Manufacturers Association, Hong Kong (Jan 2014) (link, pp.26-27)	TANG, C.Y., CHOY, Man Tik# and CHEN, Ling

Other outputs

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
238	"金屬復合材料在熱管理中的應用". The Hong Kong Metals Manufacturers Association, Hong Kong (May 2014) (link, pp.19-20)	TANG, C.Y., CHEN, Ling and CHOY, Man Tik #

Postgraduate research theses

Academic research: not refereed

Serial No.	Title/Brief Description	Author(s)
239	"A Hybrid Genetic Algorithm-based Decision Support System for Enhancing Transportation Efficiency in Reverse Logistics". (May 2014)	LIN, Canhong#
240	"A Knowledge-based Decision Support System for Managing Logistics Operations under Risk Considerations". (May 2014)	LAM, Hoi Yan#
241	"A System Monitoring Model by Examining Entity Dynamics". (May 2014)	WANG, Lei#
242	"Design and Fabrication of Multifunctional Polymer Based Nanocomposites for Bone Tissue Engineering". (May 2014)	CHEN, Ling#
243	"Development of a Cooperative Decision Support System (CDSS) for Postponement Strategies in Supply Chain". (Oct 2013)	TANG, Xiaohui#
244	"Development of an Intellectual Capital Driven Knowledge Audit Methodology for Managing Unstructured Knowledge". (Jul 2013)	GU, Jie#
245	"Fabrication of Bioactive Titanium Oxide Coating on Nickel-Titanium Using Plasma Electrolytic Oxidation". (Jul 2013)	SIU, Hin Ting#
246	"Failure Analysis of Titanium Tailor-welded Blanks under Multi-stage Forming Process". (Feb 2014)	LAI, Chi Ping#
247	"Failure Prediction of Hydroforming Aluminum Tubular Blanks". (May 2014)	WANG, Guodong#
248	"Model-based Failure Diagnostics and Reliability Prognostics for High Power White Light-emitting Diodes Lighting". (May 2014)	FAN, Jiajie#
249	"Modelling of Customer Satisfaction and Determination of Specifications for New Products Using Computational Intelligence Techniques". (May 2014)	JIANG, Huimin#
250	"Production Starting Time Control for Compensating Forecast Error and Customer Loss in Waiting". (Jun 2014)	QIAN, Chen#
251	"Resource Modelling and Allocation for Stochastic Retailer Demand". (Sep 2013)	NING, Andrew